uploading program with 5 patterns

2024-10-22 16:49:14 +02:00 · 2015-12-24 15:06:01 +01:00 · 2015-12-24 15:06:01 +01:00 · 987628da19
commit 987628da19
parent bd9348df8b
1 changed files with 133 additions and 0 deletions
--- a/TekTree.ino
+++ b/TekTree.ino
@ -0,0 +1,133 @@
+/*
+  Rick van Lieshout 
+  24-12-2015
+  LICENSE: MIT
+*/
+
+/** Constant value's, these have to be changed manually  **/
+const int MAXSEQUENCES= 20;     // number of steps in the largest sequence. Could make it 999 but that would affect performance
+const int NUMBEROFPINS = 11;    // number of leds
+const int NUMBEROFPATTERNS = 5; // number of patterns specified
+const int DELAYPOT = 0;         // number of pin that pot is connected to
+const int BUTTONPIN = 12;       // number of pin that button is connected to
+const int pinArray[NUMBEROFPINS] = {0,1,2,3,4,5,6,7,8,9,10}; // pins where leds are connected
+
+/** Regular variables, program can alter these **/
+int previousbuttonstate = 0;  // used to detect whether button is pressed
+int buttonstate = 0;          // used to detect whether button is pressed
+int pattern = 0;              // pattern to start with
+
+/** massive array which holds the patterns **/
+const byte LEDsequence [NUMBEROFPATTERNS][MAXSEQUENCES][NUMBEROFPINS] = {
+  {
+  {0,0,0,0,0,0,0,0,0,0,0},
+  },
+  {
+  {1,1,1,1,1,1,1,1,1,1,1},
+  },
+  {
+  {1,0,0,0,0,0,0,0,0,0,1},
+  {0,1,0,0,0,0,0,0,0,0,1},
+  {0,0,1,0,0,0,0,0,0,0,1},
+  {0,0,0,1,0,0,0,0,0,0,1},
+  {0,0,0,0,1,0,0,0,0,0,1},
+  {0,0,0,0,0,1,0,0,0,0,1},
+  {0,0,0,0,0,0,1,0,0,0,1},
+  {0,0,0,0,0,0,0,1,0,0,1},
+  {0,0,0,0,0,0,0,0,1,0,1},
+  {0,0,0,0,0,0,0,0,0,1,1}
+  },
+  {
+  {1,0,0,0,0,0,0,0,0,0,1},
+  {0,1,0,0,0,0,0,0,0,0,1},
+  {0,0,1,0,0,0,0,0,0,0,1},
+  {0,0,0,1,0,0,0,0,0,0,1},
+  {0,0,0,0,1,0,0,0,0,0,1},
+  {0,0,0,0,0,1,0,0,0,0,1},
+  {0,0,0,0,0,0,1,0,0,0,1},
+  {0,0,0,0,0,0,0,1,0,0,1},
+  {0,0,0,0,0,0,0,0,1,0,1},
+  {0,0,0,0,0,0,0,0,0,1,1},
+  {0,0,0,0,0,0,0,0,1,0,1},
+  {0,0,0,0,0,0,0,1,0,0,1},
+  {0,0,0,0,0,0,1,0,0,0,1},
+  {0,0,0,0,0,1,0,0,0,0,1},
+  {0,0,0,0,1,0,0,0,0,0,1},
+  {0,0,0,1,0,0,0,0,0,0,1},
+  {0,0,1,0,0,0,0,0,0,0,1},
+  {0,1,0,0,0,0,0,0,0,0,1}
+  },
+  {
+  {1,0,0,0,0,0,0,0,0,1,1},
+  {0,1,0,0,0,0,0,0,1,0,1},
+  {0,0,1,0,0,0,0,1,0,0,1},
+  {0,0,0,1,0,0,1,0,0,0,1},
+  {0,0,0,0,1,1,0,0,0,0,1},
+  {0,0,0,1,0,0,1,0,0,0,1},
+  {0,0,1,0,0,0,0,1,0,0,1},
+  {0,1,0,0,0,0,0,0,1,0,1},
+  {1,0,0,0,0,0,0,0,0,1,1}
+  }
+};
+
+/** Setup only gets run once **/
+void setup(){
+  //set all pins as input/output
+  initializePins();
+}
+
+/** Loop is constantly running **/
+void loop() {
+  // read button state
+  buttonstate = digitalRead(BUTTONPIN);
+  // if button state changed
+  if(buttonstate != previousbuttonstate){
+    previousbuttonstate = buttonstate; 
+     // check value and add to pattern
+     if(buttonstate == HIGH){
+      if(pattern +1 == NUMBEROFPATTERNS){
+        pattern = 0;
+      }else{
+        pattern++;
+      }
+     }
+  }
+
+  // Loop through all the arrays and toggle pins on or off.
+  for (int sequence=0;sequence<getSequences(pattern);sequence++) {
+    for (int pin=0;pin<NUMBEROFPINS;pin++) {
+      digitalWrite(pinArray[pin], LEDsequence[pattern][sequence][pin]);
+    }  
+    // delay between sequences, should use millis if you want instant response on the button
+    delay(getDelay(DELAYPOT));
+  }
+}
+
+/** Count the number of sequences in a specific pattern **/
+int getSequences(int pattern){
+  byte amount = 0;
+  for(byte i = 0; i<MAXSEQUENCES; i++){
+    int total = 0;
+    for(int pin=0; pin<NUMBEROFPINS; pin++){
+      total+=LEDsequence[pattern][i][pin];  
+    }
+    if(total>0){
+      amount++;
+    }
+  }
+  return amount;
+}
+
+/** get value of pot **/
+int getDelay(int potnr){
+  return analogRead(potnr);
+}
+
+/** Set all pins as either output or input **/
+void initializePins(){
+  pinMode(BUTTONPIN, INPUT);
+  for (int pin=0;pin<NUMBEROFPINS;pin++) {
+    pinMode(pinArray[pin], OUTPUT);     // we make all the declarations at once 
+  }
+}
+