added pulse and changed dev-pc configs

computers/dev-pc/xprofile.sh

@@ -1,2 +1,2 @@
-#!/bin/sh
+#!/bin/bash
-xrandr --output DVI-I-0 --off --output DVI-I-1 --off --output HDMI-0 --primary --mode 1920x1080 --pos 1920x0 --rotate normal --output DP-0 --mode 1920x1080 --pos 0x0 --rotate normal --output DP-1 --off --output DVI-D-0 --off
+xrandr --output DVI-I-0 --off --output DVI-I-1 --off --output HDMI-0 --mode 1920x1080 --pos 1920x0 --rotate normal --output DP-0 --mode 1920x1080 --pos 0x0 --rotate normal --output DP-1 --off --output DVI-D-0 --primary --mode 1920x1080 --pos 1920x0 --rotate normal

config/pulse/daemon.conf

@@ -0,0 +1,90 @@
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+
+## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
+## more information. Default values are commented out.  Use either ; or # for
+## commenting.
+
+; daemonize = no
+; fail = yes
+; allow-module-loading = yes
+; allow-exit = yes
+; use-pid-file = yes
+; system-instance = no
+; local-server-type = user
+; enable-shm = yes
+; enable-memfd = yes
+; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
+; lock-memory = no
+; cpu-limit = no
+
+high-priority = yes
+; nice-level = -11
+
+; realtime-scheduling = yes
+; realtime-priority = 5
+
+; exit-idle-time = 20
+; scache-idle-time = 20
+
+; dl-search-path = (depends on architecture)
+
+; load-default-script-file = yes
+; default-script-file = /etc/pulse/default.pa
+
+; log-target = auto
+; log-level = notice
+; log-meta = no
+; log-time = no
+; log-backtrace = 0
+
+; resample-method = speex-float-1
+avoid-resampling = yes
+; enable-remixing = yes
+; remixing-use-all-sink-channels = yes
+; enable-lfe-remixing = no
+; lfe-crossover-freq = 0
+
+flat-volumes = no
+; flat-volumes = yes
+
+; rlimit-fsize = -1
+; rlimit-data = -1
+; rlimit-stack = -1
+; rlimit-core = -1
+; rlimit-as = -1
+; rlimit-rss = -1
+; rlimit-nproc = -1
+; rlimit-nofile = 256
+; rlimit-memlock = -1
+; rlimit-locks = -1
+; rlimit-sigpending = -1
+; rlimit-msgqueue = -1
+; rlimit-nice = 31
+; rlimit-rtprio = 9
+; rlimit-rttime = 200000
+
+; default-sample-format = s16le
+default-sample-rate = 192000
+; alternate-sample-rate = 48000
+; default-sample-channels = 2
+; default-channel-map = front-left,front-right
+
+; default-fragments = 4
+; default-fragment-size-msec = 25
+
+; enable-deferred-volume = yes
+; deferred-volume-safety-margin-usec = 8000
+; deferred-volume-extra-delay-usec = 0

install.sh

@@ -98,6 +98,8 @@ function install_config {
 	ln -sf "$PWD"/config/.gitconfig ~/.gitconfig
 	ln -sf "$PWD"/config/.npmrc ~/.npmrc
 	ln -sf "$PWD"/config/user-dirs.dirs ~/.config/user-dirs.dirs
+	mkdir -p ~/.pulse
+	ln -sf "$PWD"/config/pulse/daemon.conf ~/.pulse/daemon.conf
 
 	# link system files / directories
 	sudo ln -sf "$PWD"/config/package-managers/pacman.conf /etc/pacman.conf